MMC "debug" mode AND HELPFUL MMC BUG FIXES ; TV START UP PROBLEMS

[DigitalOv]

for mee it was Ogg Vorbis.

Deleted it and all the Reg Entries (Cept for 1 or 2 Priority Entries with all the other codecs)

and Re Install it and Boom Working MMC 8.1

 

[purephase]

Thanks. Much Appreciated.

Solved my problem with MMC8.5 + TVWonder.

 

[SciDoctor]

This is my error with mmc8.5 and 64vivo and tvwonder

*** Log Manager 0: Opened on: 03/06/2003 [16:31:38]
[16:31:38] COSIController::PaintCache failed to paint to screen
[16:31:38] COSIController:AttachFeature: no genUI interface, will load all OSIs
[16:31:38] ResMngr::LoadObject CoCreate Error: ClassNotReg CLSID: {B6761AC7-0F95-4184-8CEE-0E8495BEBD13}
[16:31:38] TVUIO::PreStartUp - Optional ConO DV failed to load
[16:31:38] TuneCon::PreStartUp: Gemstar DataEngine is not registered
[16:31:38] Display::Could Not Localize RegPath for \Title
[16:31:38] CDispControl_DS:Setup: Warning FAILED CoCreate on VP Surface Allocator
[16:31:38] CDispControl_DS:Setup: FAILED CoCreate on Format Converter
[16:31:38] TvDisp: StartUp: Failed to setup Analog Capture Graph
[16:31:38] TvDisp: StartUp: No Directshow Driver objects available for startup
[16:31:38] TVUIO::Startup Failed InitDisplay on Display
[16:33:33] [PowerManagement] CPowerEntry not found! Cannot Remove Entry
[16:33:33] [ResMngr] CResMngrApp::LoadApplications() FAIL to StartUp UIO
[16:33:33] ObjectTable::Leak Feature={A62213CA-80ED-11D0-AEDB-008029E646D0} Class={A62213CA-80ED-11D0-AEDB-008029E646D0} Instance=1
[16:33:33] ObjectTable::Leak Feature={6496DE69-CA7F-11CF-BD3C-008029E89281} Class={6496DE69-CA7F-11CF-BD3C-008029E89281} Instance=1
*** Log Manager 0: Closed on: 03/06/2003 [16:33:33]

Anybody like to comment or offer a solution

PCCheck chows no problems

 

[riceboyler]

Nero Audio Encoder

Nero Audio Encoder

Warning, if you upgrade to Nero 6, it installs a new Audio Encoder that causes this exact same issue. You will have to remove it from the Registry and then prevent Nero from installing the encoder again.

 

[RavenX]

I have too problems with Nero 6. Some utilities like BackitUp cause error in Neroerr.dll when you close them and ATI MMC 8.5 is giving me an error regarding conexc.dll. I would like to use Nero 6 but I need to stop these errors. What audio codec I need to remove? All Nero codecs are installed within C:\Program Files\Common Files\Ahead directory so I'm not sure how they can interfere with MMC 8.5 player.

 

[Darkeyce]

Thanks for this thread...I've found the problem...but how do i get rid of a blank filter entry?

Connector Executor: [06:24:34] EnumGraph:: *************** Complete *************
Connector Executor: [06:24:35] Found Filter: WMVideo Encoder DMO
Connector Executor: [06:24:35] Found Filter: MSScreen encoder DMO
Connector Executor: [06:24:35] Found Filter: WMVideo9 Encoder DMO
Connector Executor: [06:24:35] Found Filter: WMVideo8 Encoder DMO
Connector Executor: [06:24:35] Found Filter: MSScreen 9 encoder DMO
Connector Executor: [06:24:35] Found Filter: ArcSoft Mpeg Writer
Connector Executor: [06:24:35] Found Filter: DV Video Encoder
Connector Executor: [06:24:35] Found Filter: Indeo® video 5.10 Compression Filter
Connector Executor: [06:24:35] Found Filter: Indeo® video 5.11 Compression Filter
Connector Executor: [06:24:35] Found Filter: Ligos GoMotion Analog to MPEG Filter
Connector Executor: [06:24:35] Found Filter: Ligos GoMotion DV to MPEG Filter (Version 1.7)
Connector Executor: [06:24:35] Found Filter: MJPEG Compressor
Connector Executor: [06:24:35] Found Filter: MJPEG Decompressor AL/BS
Connector Executor: [06:24:35] Found Filter: Pinnacle DCxx MJPEG Compressor
Connector Executor: [06:24:36] Found Filter: XLCompress
Connector Executor: [06:24:36] Found Filter: XLDecompress
Connector Executor: [06:24:36] Found Filter:
Connector Executor: [06:24:36] Found Filter: Cinepak Codec by Radius
Connector Executor: [06:24:36] Found Filter: DivX 5.0.4 Codec
Connector Executor: [06:24:36] Found Filter: MainConcept DV Codec 2.0.4
Connector Executor: [06:24:36] Found Filter: Intel 4:2:0 Video V2.50
Connector Executor: [06:24:36] Found Filter: Intel Indeo(R) Video R3.2
Connector Executor: [06:24:36] Found Filter: Intel Indeo® Video 4.5
Connector Executor: [06:24:36] Found Filter: Indeo® video 5.10
Connector Executor: [06:24:36] Found Filter: Intel IYUV codec
Connector Executor: [06:24:36] Found Filter: Microsoft H.261 Video Codec
Connector Executor: [06:24:36] Found Filter: Microsoft H.263 Video Codec
Connector Executor: [06:24:36] Found Filter: Microsoft MPEG-4 Video Codec V2
Connector Executor: [06:24:36] Found Filter: Microsoft MPEG-4 Video Codec V3
Connector Executor: [06:24:36] Found Filter: Microsoft MPEG-4 Video Codec V1
Connector Executor: [06:24:36] Found Filter: Microsoft RLE
Connector Executor: [06:24:36] Found Filter: Microsoft Video 1
Connector Executor: [06:24:36] Found Filter: XviD MPEG-4 Codec
Connector Executor: [06:24:36] Found Filter: WM Speech Encoder DMO
Connector Executor: [06:24:36] Found Filter: WMAudio Encoder DMO
Connector Executor: [06:24:36] Found Filter: ATI MPEG Audio Encoder
Connector Executor: [06:24:36] Found Filter:
Connector Executor: [06:24:36] Found Filter: IAC2
Connector Executor: [06:24:36] Found Filter: IMA ADPCM
Connector Executor: [06:24:36] Found Filter: PCM
Connector Executor: [06:24:36] Found Filter: Microsoft ADPCM
Connector Executor: [06:24:36] Found Filter: ACELP.net
Connector Executor: [06:24:36] Found Filter: DSP Group TrueSpeech(TM)
Connector Executor: [06:24:36] Found Filter: Windows Media Audio V1
Connector Executor: [06:24:36] Found Filter: Windows Media Audio V2
Connector Executor: [06:24:36] Found Filter: GSM 6.10
Connector Executor: [06:24:36] Found Filter: DV Audio -- NTSC
Connector Executor: [06:24:36] Found Filter: DV Audio -- PAL
Connector Executor: [06:24:36] Found Filter: Microsoft G.723.1
Connector Executor: [06:24:36] Found Filter: CCITT A-Law
Connector Executor: [06:24:36] Found Filter: CCITT u-Law
Connector Executor: [06:24:36] Found Filter: NCT ALF2 CD
Connector Executor: [06:24:36] Found Filter: MPEG Layer-3
Connector Executor: [06:24:36] Loading Filter: WM Speech Encoder DMO
Connector Executor: [06:24:36] Loading Filter: WMAudio Encoder DMO
Connector Executor: [06:24:36] Loading Filter: ATI MPEG Audio Encoder
Connector Executor: [06:24:36] Loading Filter:

Thanks for this thread...I've found the problem...but how do i get rid of a blank filter entry?

 

[DigitalOv]

Clean Up Your Registry

 

[Darkeyce]

Used jv 16 1.4 to clean up registry and problem still persists...any other suggestions?

Or if someone can tell me what key to go look for I'll pull it by hand...I just can't seem to find it anywhere.

 

[DigitalOv]

Well
you have 2 Blank Codecs.

Try this to find out if its an Audio Codec, Goto the DEvice Manager and DISABLE your Sound Card then Start MMC is it Starts Up then its an audio Codec Causeing the problem so that will marrow it down.

Trust me I Have had this problem since MMC 8.xx Has been out and i finally solved it and mow im happy as a clam, sorta speak.

 

[Sulik]

It's also possible to use the graph editor (graphedt.exe - you can grab it at doom9.org), in order to view all the codecs and see where they are. You can then run "regsvr32 /u codecname" to unregister it.

 

[Darkeyce]

Finally gave up and went with a system restore point...looks like it worked but it's still irritatiing. Thanks everyone.

 

[cda]

Help on logme.txt contents

Help on logme.txt contents

Need some help figuring out what this means and how to correct the conexc.dll issue

*** Log Manager 0: Opened on: 06/08/2003 [19:22:37]
[19:22:37] COSIController:AttachFeature: no genUI interface, will load all OSIs
[19:22:37] COSIController::PaintCache failed to paint to screen
[19:22:37] COSIController:AttachFeature: no genUI interface, will load all OSIs
[19:22:37] ResMngr::Found Feature: Name=Player Cmd=MFPlay GUID={5C4A58AB-CA7E-11CF-BD3C-008029E89281} #of Extensions=12
[19:22:37] ResMngr::Found Feature: Name=VCD Cmd=DSVCD GUID={5C4A58AA-CA7E-11CF-BD3C-008029E89281} #of Extensions= 0
[19:22:37] ResMngr::Found Feature: Name=CD Cmd=CD GUID={5C4A58A4-CA7E-11CF-BD3C-008029E89281} #of Extensions= 1
[19:22:37] ResMngr::Found Feature: Name=TV Cmd=TV+ GUID={AD74FB65-D55F-11D2-A41B-00104BC83279} #of Extensions= 0
[19:22:37] ResMngr::Command Line=/TV+ UIO Guid=
[19:22:37] ResMngr::Loading Feature ID: {AD74FB65-D55F-11D2-A41B-00104BC83279}
[19:22:37] ResMngr::LoadObject CoCreate Error: ClassNotReg CLSID: {B6761AC7-0F95-4184-8CEE-0E8495BEBD13}
[19:22:37] TVUIO::PreStartUp - Optional ConO DV failed to load
[19:22:37] TuneCon::PreStartUp: Gemstar DataEngine is not registered
[19:22:37] TVUIO::StartUp: Display ConO - Multimonitor mode on via registry
[19:22:37] TVUIO::StartUp: Display ConO - Invoking Startup...
[19:22:37] Display::Could Not Localize RegPath for \Title
[19:22:37] CDispControl_DS:SelectDecoder: Name=ATI Rage Theater Video Capture Index=1
[19:22:37] CDispControl_DS:Setup: Starting with 2 Crossbars for Audio & Video
[19:22:37] CDispControl_DS:Setup: Preview Out is not available on Capture Filter
[19:22:38] CDispControl_DS:Setup: Starting up using Format Converter as Capture Tee
[19:22:38] CDispControl_DS:SetDefDispMode: Selecting Video Capture Display Mode: 0
[19:22:38] CDispControl_DS:SetBestCapture: Setting Capture Pin: 720x240 @59.94fps (165722112bps)
[19:22:38] CDispControl_DS:SetVBIFormat: SetFormat: 1 on VBI pin
[19:22:38] CDispControl_DS:SetVBIFormat: VBI pin NOT connected
[19:22:38] CDispControl_DS:SetVBIFormat: MediaType on VBI Pin: Standard Succesfully set to: 1
[19:22:38] CDispControl_DS:SetBestCapture: Best video quality disabled
[19:22:38] CDispControl_DS:SetBestCapture: Video Delay set to 0
[19:22:38] CDispControl_DS:Setup_LiveStdPerf: Rendering Live Video via VideoPort
[19:22:38] CDispControl_DS:SetBestCapture: Setting Capture Pin: 720x240 @59.94fps (165722112bps)
[19:22:38] CDispControl_DS:SetVBIFormat: SetFormat: 1 on VBI pin
[19:22:38] CDispControl_DS:SetVBIFormat: VBI pin NOT connected
[19:22:38] CDispControl_DS:SetVBIFormat: MediaType on VBI Pin: Standard Succesfully set to: 1
[19:22:38] CDispControl_DS:SetBestCapture: Best video quality disabled
[19:22:38] CDispControl_DS:SetBestCapture: Video Delay set to 0
[19:22:38] CDisplay::IsAlphBlendingSupported: 1
[19:22:38] COSIController::PaintCache failed to paint to screen
[19:22:38] TVUIO::StartUp InitDisplay Completed Succesfully
[19:22:38] TVUIO::StartUp: Video ConO - Invoking Startup...
[19:22:38] TvVideo: StartUp: Using DirectShow Drivers
[19:22:38] TVUIO::StartUp: Teletext ConO - Invoking Startup...
[19:22:38] CDrvTeletext_DS:GetVBITee: Sink-to-Sink Tee is already Present
[19:22:38] CTeletext_DS:Setup: Teletext To Closed Caption Filter is not Present
[19:22:38] CTText:: Teletext ConO Failed to initialize Driver
[19:22:38] TVUIO::StartUp on optional ConO TText failed
[19:22:38] TVUIO::StartUp: Closed Captioning ConO - Invoking Startup...
[19:22:38] CCaptionControl_DS:Setup: Connected WDM CC Decoder with ATI CC Renderer
[19:22:38] CCaptionControl_DS:GetVBITee: Sink-to-Sink Tee is already Present
[19:22:38] CCaptionControl_DS:ConnectTee: Connect Decoder with Tee
[19:22:38] CCap:Caption: Attempting to Load & Initialize Closed Captioning Drivers...
[19:22:38] CCap:Caption:Captioning Source has been STOPPED
[19:22:38] TVUIO::StartUp: Sound ConO - Invoking Startup...
[19:22:38] CSoundControl_DS:Setup: start OK
[19:22:38] NumAudioDrivers:found (int) 1 drivers
[19:22:38] CSoundControl_DS:RewireAudioCapture: Audio Crossbar IS used for Audio capture
[19:22:38] TVUIO::StartUp: Tuner ConO - Invoking Startup...
[19:22:38] Invoke IAMTvTuner:ut_CountryCode() failed on code: 2
[19:22:40] CTunerControl_DS:SetInputType: Input Type Set to = 1
[19:22:40] CVideoControl_DS::Before validate, GetGamma (1)
[19:22:40] TVUIO::StartUp: Time Shifting ConO - Invoking Startup...
[19:22:40] CDrv_TShift:Setup: Failed to query for ICapXForm Interface
[19:22:40] CDrv_TShifteleteRingBuffer: Deleting RingBuffer File: D:\ATI MMC\cda\ATI-TShift.vcr
[19:22:40] CDrv_TShift:SetHWDecode: Hardware Decoder Status set to = 1
[19:22:40] TVUIO::StartUp: Parental Control ConO - Invoking Startup...
[19:22:40] CDrvPControl_DS:GetVBITee: Sink-to-Sink Tee is already Present
[19:22:40] TVUIO::StartUp: Channel Surf ConO - Invoking Startup...
[19:22:40] TVUIO::StartUp: PIP ConO - Invoking Startup...
[19:22:40] CPrivatePip: StartUp: Failed to Verify TV Wonder Vendor
[19:22:40] TVUIO::StartUp on optional PIP ConO failed
[19:22:40] TVUIO::StartUp: EPG ConO - Invoking Startup...
[19:22:40] CPrivateEPG::LoadDataEngine: Failed to load Gemstar DataEngine
[19:22:40] TVUIO::StartUp: Video Capture ConO - Invoking Startup...
[19:22:40] CDrvSE_HW:pen: Failed to query HW SE Configuration Interface
[19:22:40] CDrv_Capture:pen: Failed to open SE object: class CDrvSE_HW
[19:22:40] TVUIO::StartUp: Gallery ConO - Invoking Startup...
[19:22:40] TVUIO: StartupLiveGraph -- Entering...
[19:22:40] TVUIO: StartupLiveGraph -- Invoking Run
[19:22:40] TVUIO: StartupLiveGraph -- Checking Graph State
[19:22:40] TVUIO: StartupLiveGraph -- Completed Succesfully...
[19:22:40] TvUIO::Creating Layout 0xa [ConO=0]
[19:22:40] TvUIO::Creating Layout 0xc [ConO=0]
[19:22:40] TvUIO::Creating Layout 0x3 [ConO=0]
[19:22:40] TvUIO::Creating Layout 0x5 [ConO=0]
[19:22:40] TvUIO::Creating Layout 0x1 [ConO=0]
[19:22:40] TvUIO::Creating Layout 0xf [ConO=0]
[19:22:40] TvUIO::Creating Layout 0xe [ConO=0]
[19:22:40] TvUIO::Creating Layout 0x8 [ConO=0]
[19:22:40] TvUIO::Creating Layout 0x6 [ConO=0]
[19:22:40] CVideoControl_DS::Before validate, GetGamma (1)
[19:22:40] CVideoControl_DS::SetGamma DDCOLOR_GAMMA (1)
[19:22:40] CSndCtrl_DS::SignalHasSAP : GetAvailableTVAudioModes() returned 0X00000011
[19:22:40] CSndCtrl_DS::SetSAP : put_TVAudioMode() with 0X00000011
[19:22:41] CSndCtrl_DS::SignalHasSAP : GetAvailableTVAudioModes() returned 0X00000013
[19:22:41] CSndCtrl_DS::SetSAP : put_TVAudioMode() with 0X00000002
[19:22:41] CTuneCon:: EPG Application is not preset
[19:22:41] COSIController:AddLayout: Failed to SetOSILayout: 50001, for panel: 10000000
[19:22:41] COSIController:AddLayout: Failed
[19:22:41] [PowerManagement] Display required
[19:22:41] [PowerManagement] Do not allow suspend/standby
[19:22:41] TVUIO: Startup OK
[19:22:41] CDispControl_DS::Live Graph Received:EC_VIDEO_SIZE_CHANGED
[19:22:41] CDispControl_DS::Live Graph Received:EC_VIDEO_SIZE_CHANGED
[19:22:41] CDispControl_DS::Live Graph Received:EC_CLOCK_CHANGED
[19:22:41] CDispControl_DS::Live Graph Received:EC_PAUSED

Thanks in advance

 

[Fetcher]

D-Oh!

D-Oh!

Damn!

Just as I was about to find what was crashing my TV App... It starts flawlessly!

I mean... It crashed everytime! No way to make it work. Had to use Showshifter until the trial ended...

... just like a weird DirectX 7 bug I had recently. The D3D 7 calls were not working (as weren't most of my games) and suddenly, when I was about to give up and format (no good Sys restore points available), I did one final test just for fun and... everything was fine!?!?!

Now if the Rage3D Tweak coder would just add this log feature with a simple button we could all have a good troubleshooter here!

Now, of course, ATI would not let that too usefull option easily available. They would then have to create a realistic "Known Issues" web pages and they would see their customers run away from MMC much too fast. Shame shame shame.

In any case, one GOOD point for ShowShifter over ATI's MMCrap: It always loads. It finds ways around problems instead of crashing over them. I may even consider eventually buying it.


Fetcher

 

[queonda]

I don't think I did this right but when I had hyperthreading on (after I restalled everything from scratch) I had tv-on-demand and when I went back in time I had NO PICTURE only sound and the pogress bar...then windows restarted. I looked at the errorlog.txt and got this:

*** Log Manager 0: Opened on: 8/14/2003 [21:36:02]
[21:36:02] COSIController::PaintCache failed to paint to screen
[21:36:02] COSIController:AttachFeature: no genUI interface, will load all OSIs
[21:36:03] ResMngr::LoadObject CoCreate Error: ClassNotReg CLSID: {B6761AC7-0F95-4184-8CEE-0E8495BEBD13}
[21:36:05] COSIController::PaintCache failed to paint to screen
[21:36:07] CPrivatePip: StartUp: Failed to Verify TV Wonder Vendor
[21:36:10] COSIController:AddLayout: Failed to SetOSILayout: 50001, for panel: 10000000
[21:36:10] COSIController:AddLayout: Failed
[21:36:11] COSIController:AddLayout: Failed to SetOSILayout: 1, for panel: 0
[21:36:11] COSIController:AddLayout: Failed
[21:36:11] COSIController:AddLayout: Failed to SetOSILayout: 3, for panel: 0
[21:36:11] COSIController:AddLayout: Failed
[21:36:11] COSIController:AddLayout: Failed to SetOSILayout: 50002, for panel: 0
[21:36:11] COSIController:AddLayout: Failed
[21:36:11] COSIController:AddLayout: Failed to SetOSILayout: 60001, for panel: 0
[21:36:11] COSIController:AddLayout: Failed
[21:36:11] COSIController:AddLayout: Failed to SetOSILayout: 60002, for panel: 0
[21:36:11] COSIController:AddLayout: Failed
[21:36:14] CDispControl_DS:SetBestCapture: Failed to Set HW De-Interlacing on CapXForm
[21:36:14] CDispControl_DS:SetBestCapture: Failed to Disable HW ColorSpace Conversion on CapXForm
[21:37:32] ObjectTable::Leak Feature={A62213CA-80ED-11D0-AEDB-008029E646D0} Class={A62213CA-80ED-11D0-AEDB-008029E646D0} Instance=1
*** Log Manager 0: Closed on: 8/14/2003 [21:37:32]

Anyone have any idea what this means?

 

[DigitalOv]

From the Looks of the LOG,
You Have a hardware Failer,

I Could be wrong though, best to contact ATI

 

[queonda]

I know how to get into the reg editor. But how do I put these in??

"Min"="0"
"Max"="1000"
"Window"="500"
"File"="C:\\logme.txt"

New string???

 

[jch]

I know how to get into the reg editor. But how do I put these in??

"Min"="0"
"Max"="1000"
"Window"="500"
"File"="C:\\logme.txt"

New string???

Yup. New string.

.../j

 

[Trav06]

Need Help

Need Help

I have no experience with editing my registry. I know how to get to the registry editor (run > regedit), but that's it. I tried winging it though and tried adding those registry values eddie mentioned. I'm not sure what was supposed to happen, but nothing did. There was no log file created on the c:\ drive.

If there is someone who could give me more of a step-by-step approach to fixing this problem, I would really appreciate it.

Also, on a side note. I have MMC 8.2 ... and I have seen mention of MMC 8.5, I have the ATI TV Wonder Pro card, and if an 8.5 is available could someone also please tell me where to get it.

I really just want to be able to use my TV Tuner card again. This is very frustrating. Thanks for any help you can offer.

-Trav

 

[r_q]

'Unable to start TV' fix (9100 vivo, catalyst 3.10 + MMC 8.8)

'Unable to start TV' fix (9100 vivo, catalyst 3.10 + MMC 8.8)

1. check your debug info (http://www.rage3d.com/board/showthread.php?threadid=33675153&highlight=MMC+log)

2. if u found CDrvDisp::FilterVidDecoders Removing Non ATI (Decoder with VP)!
*** Log Manager 0: Opened on: 2001-12-19 [22:46:11]
[22:46:11] Schedule::Could Not Localize RegPath for \Schedule\Names
[22:46:11] Schedule::Could Not Localize RegPath for \Schedule\Descriptions
[22:46:11] COSIController:AttachFeature: no genUI interface, will load all OSIs
[22:46:11] COSIController::PaintCache failed to paint to screen
[22:46:11] COSIController:AttachFeature: no genUI interface, will load all OSIs
[22:46:11] ResMngr::GetObject CoCreate Error: ClassNotReg CLSID: {CA0974B8-2353-41AC-9562-7FD6BA6B27A3}
[22:46:11] [MsgBox] Startup: Failed to CoCreateInstance for IID_IRemoteWonderInfo interface
[22:46:12] [TenFtUI] LoadApplet: Failed to startup applet {F80F96F3-F597-4BBE-9C39-A6F742A06057}
[22:46:12] ResMngr::Found Feature: Name=EAZYSHARE TV Cmd=RTV GUID={3243FD0F-F982-48FA-8915-550572CFD6B5} #of Extensions= 0
[22:46:12] ResMngr::Found Feature: Name=TV Cmd=TV+ GUID={AD74FB65-D55F-11D2-A41B-00104BC83279} #of Extensions= 0
[22:46:12] ResMngr::Command Line=/TV+ UIO Guid=
[22:46:12] ResMngr::Loading Feature ID: {AD74FB65-D55F-11D2-A41B-00104BC83279}
[22:46:12] ResMngr::LoadObject CoCreate Error: ClassNotReg CLSID: {B6761AC7-0F95-4184-8CEE-0E8495BEBD13}
[22:46:12] TVUIO::PreStartUp - Optional ConO DV failed to load
[22:46:12] TuneCon::PreStartUp: Gemstar DataEngine is not registered
[22:46:12] TVUIO::StartUp: Display ConO - Multimonitor mode on via registry
[22:46:12] TVUIO::StartUp: Display ConO - Invoking Startup...
[22:46:12] Display::Could Not Localize RegPath for \Title
[22:46:12] CTvDisp::SetupDriverObject: Using DirectShow Drivers
[22:46:12] CDrvDisp::FilterVidDecoders Removing Non ATI (Decoder with VP)!
[22:46:12] CDrvDisp::FilterVidDecoders Removing Non ATI (Decoder with VP)!
[22:46:12] CDrvDisp:SelectDecoder: Name= Index=-1
[22:46:12] CTvDisp::SetupDriverObject: Failed to initialize Driver
[22:46:12] CTvDisp::SetupDriverObject:FAILED to SetupDriverObject
[22:46:12] TVUIO::Startup Failed InitDisplay on Display

3. get some hexeditor
open: ...\ATI Multimedia\main\DrvDShow.dll (size: 876618, fileVer: 8.8.006)
find: /81/7D/E8/00/E8/3F/03/74/ replace to: /81/7D/E8/00/E8/3F/03/EB/

----------

datail info:
...\ATI Multimedia\main\DrvDShow.dll (size: 876618, fileVer: 8.8.006)
00013885: FF1538000810 call CreateDCA ;GDI32.dll
0001388B: 8945D8 mov [ebp][-28],eax
0001388E: 8B45DC mov eax,[ebp][-24]
00013891: 50 push eax
00013892: 6A40 push 040
00013894: 8B4DD4 mov ecx,[ebp][-2C]
00013897: 51 push ecx
00013898: 6A10 push 010
0001389A: 6806730000 push 000007306 ;??? CWDDECI_GETASICID ???
0001389F: 8B55D8 mov edx,[ebp][-28]
000138A2: 52 push edx
000138A3: FF1534000810 call ExtEscape ;GDI32.dll
;returned detailed asic info & other hardware ids
;...some bit-math here...
; and ...
00013AFE: 817DE800E83F03 cmp d,[ebp][-18],0033FE800 ; for my ATI: 00230C800
00013B05: 747C je 000013B83
00013B07: 817DE800284001 cmp d,[ebp][-18],001402800
00013B0E: 7473 je 000013B83

 

[Klaus Horst]

@r_q
I had the same problem with my 9000 ViVo, your fix solved it.

Thanks
-Klaus-

PS: I think, ATI doesn't do any tests with such "old" cards . . .