Originally posted by Nunz
View Post
Announcement
Collapse
No announcement yet.
Ryzen 5000 series overclocking guide
Collapse
X
-
Originally posted by acroig View PostSystem looks bitchin man. You kept the G7? I thought you got rid of it."There is no beggining, and there is no end.There is no alpha, and there is no omega.You never began, and you will never end."
Comment
-
Originally posted by acroig View PostTo me this is one of the best posts KAC has ever made as it shows that unless you need a new CPU for another reason some older CPUs like the 8086K KAC used to have are still very much worthwhile.
While I'm sorry he's gone through this it helps me and others focus on what's most important, GPU upgrades. So thanks KAC for taking one for the team and next time be a little more patient when purchasing new hardware."There is no beggining, and there is no end.There is no alpha, and there is no omega.You never began, and you will never end."
Comment
-
Seems the 5900x will have some performance uplift vs 5600x in this game.... Look at 5900x oced with Memory timing tuned !!! Wow
https://www.pcgameshardware.de/Cyber...Cw_PGJlbQffETk"There is no beggining, and there is no end.There is no alpha, and there is no omega.You never began, and you will never end."
Comment
-
Shame they didn't do that for all CPU's in the list..CROSSHAIR X670E HERO / R9 7950X3D / RTX 4090 GAMING OC / TRIDENT Z5 NEO RGB 6000 CL30 / SAMSUNG 980pro 1TB / 2x SAMSUNG 980 1TB / H150i ELITE LCD / ATH-A2000Z / HX1200 / AW3821DW 38" / LG C2 OLED evo 55" / Enthoo 719 / K70 MKII + Zowie S2 / K57 + Harpoon / Xbox Series X Controller / REVERB G2 V2
____________________
Comment
-
Ok I think I need help again. I did nothing to this 5900X except:
Enable PBO
Set DDR4 to 3733
Set FCLK to 1866
Everything is running but hot damn it is idling at 60 C (max is 84 C in Real Bench - 2 C less than 5600X)
Voltage is about 1.48 typically. Voltage is bouncing around like a maniac.
Wtf? What should I do with this damn thing to:
1) Make it run cool at idle
2) Not apply 1.48 volts to the damn thing
Read some posts on forums and they say it is normal behavior. Well normal my ass. I can't have a 60 C idle CPU.
Comment
-
Originally posted by KAC View PostOk I think I need help again. I did nothing to this 5900X except:
Enable PBO
Set DDR4 to 3733
Set FCLK to 1866
Everything is running but hot damn it is idling at 60 C (max is 84 C in Real Bench - 2 C less than 5600X)
Voltage is about 1.48 typically. Voltage is bouncing around like a maniac.
Wtf? What should I do with this damn thing to:
1) Make it run cool at idle
2) Not apply 1.48 volts to the damn thing
Read some posts on forums and they say it is normal behavior. Well normal my ass. I can't have a 60 C idle CPU.
It's an 12 core CPU...What do you think ?"There is no beggining, and there is no end.There is no alpha, and there is no omega.You never began, and you will never end."
Comment
-
Originally posted by Dave View PostMy 3900X (12 core) idles at 28C
According to techpowerup graphs the load at stock is 67 C and oced to 4.5 ghz is 79 C
https://www.techpowerup.com/review/a...-5900x/20.html"There is no beggining, and there is no end.There is no alpha, and there is no omega.You never began, and you will never end."
Comment
-
Not sure where the hate is coming from. If you guys don’t want to help that is fine. Nobody is forcing you to read a thread that is explicitly about helping me overclock this CPU.
Anyways, I lowered the voltage to 1.3 manually and it is idling at 53 C instead of 62 C. From a performance standpoint I see it routinely boost to 4.95 single core and usually stays around 4.6-4.7 on most cores.
I have only set PBO to auto, FCLK to 1866, DDR4 to 3733 and volts to 1.3. Didn’t touch anything else. My timespy score jumped from 16.2K with 8086K to 17.76K with this processor.
I am unable to replicate Cinebench results but my Real Bench jumped from 175K on 8086K to 310K with this processor. Everything apart from Cinebench seems to be correct.
Will play some more. Also I have never seen Cinebench run this fast lol
Comment
-
Originally posted by Mangler View PostDid you have EGS running when you had 60C idle temps?
Just closed it and idle dropped to 46 C. Wtf? It was 53 C before. What does that have to do with anything?
I am still punching 1.3 volts only though. Everything seems stable. I may drop voltage to 1.25 and test next.
Game temps are 73 C in HZD.
Comment
-
Make sure to retest your performance benchmarks since you lowered voltage to 1.3. With my Zen 2 CPU when i lowered voltage to make it run cooler it also lost some performance. In the end after lots of testing i ended up just using a negative offset of -0.048. That was the lowest i could go on the voltage before Cinebench score started to suffer.
Don't worry about it running at close to 1.5v. It worried me at first too but that is normal operating voltage for Ryzen. I spent a good amount of time reading up on that.
Comment
-
Every ryzen I've had is all over the place constantly even at idle on voltage and temps spiking and drooping. Unless I shut off CPB, this is the outcome. I'm on a 280mm aio and this 5950x idles in the 40s and 50s, and it doesn't stay still for long either.
AMD Ryzen 7950X
32GB Kingston 6400 MT/s
MSI X670E Carbon
NVidia 4090 FE
Comment
-
Originally posted by KAC View PostOk I think I need help again. I did nothing to this 5900X except:
Enable PBO
Set DDR4 to 3733
Set FCLK to 1866
Everything is running but hot damn it is idling at 60 C (max is 84 C in Real Bench - 2 C less than 5600X)
Voltage is about 1.48 typically. Voltage is bouncing around like a maniac.
Wtf? What should I do with this damn thing to:
1) Make it run cool at idle
2) Not apply 1.48 volts to the damn thing
Read some posts on forums and they say it is normal behavior. Well normal my ass. I can't have a 60 C idle CPU.
Comment
-
Well I managed to do some stuff. In games it is boosting till 4.8 Gs and sometimes hits 4.95 Gs when I put load on it.
Max temps when benching hard (like Real Bench stress test) is about 84 C. For most benches it is typically around 80 C.
Max temps while playing Cyberpunk for 1 hour is about 70 C. HZD bench will put it at 73 C tops.
It is now idling at 45 C. I put volts to 1.25 volts for daily use. My real bench jumped from 310K to 319K. I didn't try other benches but my game FPS remained the same (tested ACO, FCND and HZD).
I think I will leave it here for now and see what's up.
Comment
-
Originally posted by KAC View PostWell I managed to do some stuff. In games it is boosting till 4.8 Gs and sometimes hits 4.95 Gs when I put load on it.
Max temps when benching hard (like Real Bench stress test) is about 84 C. For most benches it is typically around 80 C.
Max temps while playing Cyberpunk for 1 hour is about 70 C. HZD bench will put it at 73 C tops.
It is now idling at 45 C. I put volts to 1.25 volts for daily use. My real bench jumped from 310K to 319K. I didn't try other benches but my game FPS remained the same (tested ACO, FCND and HZD).
I think I will leave it here for now and see what's up.
Comment
-
Originally posted by Riptide View PostWhat is the general consensus as far as enabling 2T and disabling gear down mode vs. 1T and keeping it enabled?My world is a world of concepts and principles, not a battlefield - "war" is simply the wrong metaphor for where I'm coming from.
Comment
Comment