-Post pics of your computer-

[demo]

Who needs Ray Tracing when you have Vector Tracing.

What the hell man that is sweet

[Trunks0]

Couple pics of my current, and definitely dated, setup.

[Evileh]

that case is so close to the wall all the heat out the back is just bouncing right back at it.

[Mangler]

The exhaust on that case is in the roof.

[Trunks0]

This might give a better perspective... and made me realize I need to dust lol


But everything is angled so it exhausts out the top

[0091/2]

Would that case have a problem installing wi-fi antennas? Is the top removable?

[Trunks0]

I might, depending on the antenna, though you can always extend those to get around it. It is removable, but kinda ugly without the cover.

[Evileh]

That is the weirdest case design ever lol

[Mangler]

The design works though, when it comes to air cooled builds, there are few cases that can beat the raven/fortress.

[Hapatingjaky]

Silverstone used to make some of the best 90 degree oriented chassis. But they fell from grace. The last good case form them was the TJ11. Use it for a server system at work.

It still has some of the best cooling around due to the exhaust method of the case. You can also fit dual 480 rads in the bottom. I had an XSPC setup in there, 480 rad in the bottom with a front-bat res+pump. Best cooling setup I ever had.

[Omega53]

[Trunks0]

That is sick, I love those fans. They just offer so much for lighting awesomeness.

[0091/2]

Can the RGB be turn off?

[Megaman]

Can the RGB be turn off?

Yes.

[0091/2]

Lighting off with the PC running?

[Megaman]

Lighting off with the PC running?

Of course. It's all software controlled

[Dungeoncrawler]

Love this thread - great pics everyone

[aviphysics]

Couple pics of my current, and definitely dated, setup.

Which trackball is that?

[aviphysics]

What the hell man that is sweet

It is my Vectrex station. Made that cabinet shortly before the pic. Before that, it lived on my computer desk and wasn't getting as much love from the kids and visitors as it deserves.

[Trunks0]

Which trackball is that?

Elecom M-HT1URBK wired, or just Elecom HUGE. I got it to replace my Microsoft Explorer Trackball as another one of those are now insanely expensive. I also wanted something different from the Logitech Marble mice I'd used for years. So this had tons of buttons, Omron switches, the scroll wheel both clicks n' tilts to the sides and I can adjust the DPI on the fly. Seemed like a good replacement.

Elecom's website has some pretty hilarious engrish

https://www.elecom.co.jp.e.gj.hp.transer.com/products/M-HT1URBK.html

A feeling of chastity ball beyond imagination that large truck ball of 52mm in diameter realizes! Track ball mouse "HUGE" of forefinger, the middle finger operation type equipped with palm rest which reduced burden to wrist in long-time PC work.

And before you ask, I snagged it on Amazon. Where it is pretty affordable to top it all off.

[Megaman]

Elecom M-HT1URBK. I got it to replace my Microsoft Explorer Trackball as those are now insanely expensvie and I wanted something different from the Logitech Marble mouse I'd used for years. Elecom's website has some pretty hilarious engrish.

https://www.elecom.co.jp.e.gj.hp.tra...M-HT1URBK.html

Support ball made of population ruby selected carefully.

Also....We can easily remove ball from hole of the back side and are design that is easy to maintain ball and internal ball tray.

[aviphysics]

Support ball made of population ruby selected carefully.

Also....We can easily remove ball from hole of the back side and are design that is easy to maintain ball and internal ball tray.

Chastity ball is just the feature I have been looking for in my pointing device.

[Omega53]

Added an AIO and new PSU

[Greasy]

Nice build man.

[Omega53]

Nice build man.

Thanks! Last ones I promise. Cleaned up some wiring. I need to grab some Cablemod Pro cables for the GPU. The ones that come with the RM750X are garbage.

[demo]

Looks great man. I like that case, think I might get one.

[Omega53]

[yt]PCmwQ5DA_DQ[/yt]

Replaced the GPU and Motherboard PSU cables. Looking much better now.

[Greasy]

Looks great man. I like that case, think I might get one.

Seems like a 100% neg pressure design. Unless you're using the fans at the bottom, but you need to get it off the carpet before you do that.

I do love the layout of the case though.

[Omega53]

Seems like a 100% neg pressure design. Unless you're using the fans at the bottom, but you need to get it off the carpet before you do that.

I do love the layout of the case though.

I added a table. Next is to have 3 intake fans on the bottom and I'm finally done!!!

[Mangler]

Why don't you just use the side fans as the intake?

I think gamersnexus tried out all different fan configurations and that was the best option for both cpu and gpu temps.

[Omega53]

Why don't you just use the side fans as the intake?

I think gamersnexus tried out all different fan configurations and that was the best option for both cpu and gpu temps.

Because then the pretty lighting gets obstructed when placed the other way

[CurrentlyPissed]

Why don't you just use the side fans as the intake?

I think gamersnexus tried out all different fan configurations and that was the best option for both cpu and gpu temps.

Usually thats a radiator on that case so probably best to throw that to the back. I almost bought that case but the layout just didn't work for me. And I'd need 6000 fans.

[Evileh]

Dads build so far.. Sorry for the shitty quality, my phone is garbage.. all that is needed now is for us to wait for the damn power supply to come. lol.

[KAC]

I was about to say that is a pretty clean looking build and then noticed no wires lol.

[Evileh]

I was about to say that is a pretty clean looking build and then noticed no wires lol.

It's still gonna look pretty much like that as well when I'm done lol

[lmchv]

Beautiful case, here's before the invertion:



Here's after the invertion and already assembled:



With the door open:



Close up:

[CurrentlyPissed]

New parts and inverted.

[KAC]

Looks like a lot of poor gays got on the AMD bandwagon.

[Mangler]

Look, we all know that the human eye can't see above 24 fps so ryzen 3xxx was the perfect choice for us.

[CurrentlyPissed]

Looks like a lot of poor gays got on the AMD bandwagon.

Coming from a 1700x, was a welcoming upgrade.