-Post pics of your computer-

[CurrentlyPissed]

I guess it depends on how your case configuration, but my preference is to introduce fresh air to the CPU, GPU and front of the case, then let it exhaust through the back vents on its own. The majority of the air is that is blown into the case is going to go through those rear vents whether there are exhaust fans there or not and the components that need it, get fresh air get it fed directly to them.

Yeah but you are stagnating air without exhaust. Instead of creating a flow channel, you will have air pockets and you will actually limit your amount of intake doing that. (which is another reason I prefer negative pressure). You should always have at least 1 exhaust fan, even in positive pressure situations.

[BababooeyHTJ]

Yeah but you are stagnating air without exhaust. Instead of creating a flow channel, you will have air pockets and you will actually limit your amount of intake doing that. (which is another reason I prefer negative pressure).

Yeah but that sucks in dust through any crack in the case. I prefer positive airflow through fan filters myself. Thats one area where the FT-02 does extremely well.

[CurrentlyPissed]

Yeah but that sucks in dust through any crack in the case. I prefer positive airflow through fan filters myself. Thats one area where the FT-02 does extremely well.

You can acheive positive pressure with exhaust fans. Just have to make sure you are doing the correct amount of intake per exhaust based on static pressure, and CFM of the fans.

I really hope soon cases start using rubberized seals on areas to prevent dust. It would be nice to actually have a dustless case for once. And it would only benefit case flow even more with no leakage.

[aviphysics]

Yeah but you are stagnating air without exhaust. Instead of creating a flow channel, you will have air pockets and you will actually limit your amount of intake doing that. (which is another reason I prefer negative pressure). You should always have at least 1 exhaust fan, even in positive pressure situations.

I would like to see some evidence of what you are saying. An intake fan should perturb stagnating air just as well, if not better than an exhaust fan. Think about it this way. The air you are blowing in has to leave the case one way or another. You can get it to leave the case through a particular route by adding an exhaust fan or by covering up other openings.

Looking at server chassis, at least the ones I have scene, they have fans on one side and blow air through the case without exhaust fans. Pretty much true of almost all cooling systems I have scene that were designed by professionals.

The way I think about it is that adding a intake fan increases the flow of fresh air into the computer. Adding an exhaust fan does not or creates negative case pressure if it does. Personally, I would really like to see a good comparison. Preferably one that compares not just exhaust vs no exhaust but compares the addition of intake fans (at appropriate positions) with the addition of exhaust fans.

[caveman-jim]

aviphysics, what you're ignoring is static pressure and environments. Server fans are not designed for quiet, they are designed to push air over components and overcome static pressure. servers are also designed to be run in climate controlled datacenters with hot and cold aisles. so the premise isn't easily translatable to desktop computers.

if your intake fans are sufficient to overcome the static pressure of the air building up inside the case then it will be cooling sufficiently. otherwise you'll need an exhaust fan to promote flow and circulation.

if you have filtered intakes you also need to think about the flow resistance those add as well, more static pressure to overcome.

In 2010 I did some simple fan placement testing, check it out here. http://www.rage3d.com/reviews/coolin...a_nf-s12b_flx/

[aviphysics]

aviphysics, what you're ignoring is static pressure and environments. Server fans are not designed for quiet, they are designed to push air over components and overcome static pressure. servers are also designed to be run in climate controlled datacenters with hot and cold aisles. so the premise isn't easily translatable to desktop computers.

if your intake fans are sufficient to overcome the static pressure of the air building up inside the case then it will be cooling sufficiently. otherwise you'll need an exhaust fan to promote flow and circulation.

if you have filtered intakes you also need to think about the flow resistance those add as well, more static pressure to overcome.

In 2010 I did some simple fan placement testing, check it out here. http://www.rage3d.com/reviews/coolin...a_nf-s12b_flx/

I considered static pressure inside the case and decided that it did not seem substantial. As for the other factors, for either a home computer or a server, the exhaust should not feed the intake regardless of fan layout.

Looking at the article now.

[aviphysics]

Finished looking through the article. Interesting. Looks like the side intake and rear exhaust position yielded similar results. Adding extra fans didn't seem to make much of a difference. Sort of suggests that their isn't much benefit increasing the case airflow beyond a certain point.

Too bad you didn't measure hard drive temperatures. I have always found that I needed a fan on the HD's to keep them at a reasonable temperature.

BTW, in your article you agree that static pressure isn't much of an issue.

[Hello 2.0]

My new Haswell build. I also realized after taking these pictures that I had my GPU in the 2nd PCI-e slot. I had to flip the CPU cooler upside-down to get the GPU to fit in slot 1. Unfortunately nothing displays when I turn it on and I'm not sure why :-/ It powers up but my monitor isn't being recognized.

[demo]

That's a kick ass little system

[Megaman]

My new Haswell build. I also realized after taking these pictures that I had my GPU in the 2nd PCI-e slot. I had to flip the CPU cooler upside-down to get the GPU to fit in slot 1. Unfortunately nothing displays when I turn it on and I'm not sure why :-/ It powers up but my monitor isn't being recognized.

Nice!


That radiator denying you SLI?

[Hello 2.0]

Nice!


That radiator denying you SLI?

Actually, I just checked and the ACX cooler on the GPU hangs a tad low, so I don't think I could go SLI. I probably could if I went with a reference blower card.

[Megaman]

Actually, I just checked and the ACX cooler on the GPU hangs a tad low, so I don't think I could go SLI. I probably could if I went with a reference blower card.

Oh well, it is a cheap fix.

[BababooeyHTJ]

Nice, what case is that? It looks awesome.

[shadow001]

Given that i bought the exact same motherboard but as a gift for my brother(along with an ivy bridge 3770k,16 GB RAM and a 256GB Samsung 840 pro), are you sure that that motherboard recognizes haswell CPU's?


I was Under the impression that it only goes up to ivy bridge CPU's?

[Hello 2.0]

I feel retarded. I couldn't figure out why my monitor wouldn't display, so I went back and double checked everything and found 1 stick of RAM wasn't seated completely. Everything works fine now. The Gene VI does work with Haswell. It is a Z87 board. The BIOS on this MOBO has 1,001 different things to play around with. I'm leaving everything auto until I have a month to read and tinker with all the settings.

Nice, what case is that? It looks awesome.

It's the SilverStone SG10. Smaller than the BitFenix Prodigy, but can still fit an mATX mobo and full size GPU in SLI...if you get a blower type card.

To give you an idea of scale, here it is next to my GPU box.

[shadow001]

I feel retarded. I couldn't figure out why my monitor wouldn't display, so I went back and double checked everything and found 1 stick of RAM wasn't seated completely. Everything works fine now. The Gene VI does work with Haswell. It is a Z87 board. The BIOS on this MOBO has 1,001 different things to play around with. I'm leaving everything auto until I have a month to read and tinker with all the settings.

My bad, i got the previous Gene V board, which is an 1155 socket board and i hadn't realised that Asus made a new version for haswell....As for the case, i'm getting the corsair obsidian 350D case with the plexi side:

[demo]

That's not a bad case, I have one for my other machine.

That silverstone kicks ass though, so compact.

[MangaSpawn64]

That's not a bad case, I have one for my other machine.

That silverstone kicks ass though, so compact.

Most Silverstone cases rocks, love them.

If I didn't see the Raven 2 evo, I'd have bought a Corsair though.

[Ristogod]

My next case.

http://www.amazon.com/Corsair-Carbide-Series-Airflow-CC-9011030-WW/dp/B00D6GINF4/

[Greasy]

My next case.

http://www.amazon.com/Corsair-Carbid...dp/B00D6GINF4/

That's a slick looking case. I can't wait to see that build!

[BababooeyHTJ]

I agree, that is a nice looking case.

[Dave]

It is a nice case. Still love my Coolermaster HAF XB though

[CurrentlyPissed]

My next case.

http://www.amazon.com/Corsair-Carbid...dp/B00D6GINF4/

That case, will be my next as well, holy **** that case is sick and hell of nice for the price.

[demo]

Weeeeee new RAM so thought I'd post a pic. Not so pretty to look at, but it powers through everything I throw at it.

[KAC]

Noctua fans look like crap in a black case.

[Ristogod]

Noctua fans look like crap in a black case.

It's strange they won't offer alternative cooler schemes. Just think how many others would go for them. It's the number one complaint I keep seeing.

[demo]

They look excellent under LEDs or UV lights, because they're nuetral, but people like KAC can't think that far ahead.. IMO, a white case decked out with Noctua fans and a blue LED would look great.

[Treeckcold57]

Noctua fans look like crap in a black case.

I don't care about the color, but as long as Noctua fans are excellent airflow and I don't even stare at it myself. So...the colors aren't matter to me.

[KAC]

They look excellent under LEDs or UV lights, because they're nuetral, but people like KAC can't think that far ahead.. IMO, a white case decked out with Noctua fans and a blue LED would look great.

Yes and a black case with a disco ball inside would totally rock...

[demo]

Why do you always have to be a dick?

[Megaman]

Why do you always have to be a dick?

[mullet]

Noctua fans look like crap in a black case.

I agree, it's like KAC in a lime green speedo.

[KAC]

Why do you always have to be a dick?

Why so defensive son? I don't like something and said it. If you like it more power to you.

[demo]

Why so defensive son? I don't like something and said it. If you like it more power to you.

I don't have a problem with your original comment.

[KAC]

I don't have a problem with your original comment.

Tomorrow I install disco balls in my PC. Then you can comment

[demo]

Geez I want to punch you in the mouth and watch you cry

[KAC]

Geez I want to punch you in the mouth and watch you cry

Bwahahaha...

[KAC]

New computer reporting for duty. Sorry demo no disco ball...
I call it the BONER EDITION

Side view


Internals


Top view. 200 mm is a big frickin' fan


Elite cable management skills

... of the shop guy

One more just because


Small boner. Big boner


Top view

[demo]

And I thought mine was rough.. you payed someone to do that??

[Redeemed]

Demo...