ATI Tray Tools 1.2.6.930

spajdr · Sep 19, 2006, 09:37 AM

[+] Added configuration dialog for Overdrive 3. You can use it if you don't want to overclock your board on low level or if you have a problem with low level overclocking. Remember this option will be active only if your video board support Overdrive version 3 and ATI HotKey poller service is started.
[+] Added overclocking support for X1300/X1600/X1800/X1900. Memory overclocking for X1300 doesn't work in this release. Also remember that you must disable ATI HotKey poller if your board can operate in 2D/3D mode or your clocks always will be
resets to ATI default clocks. Try do not overclock your board while any 3D games are active. Do it before launching game via game profiles it is a safest way.[*] Updated color correction hotkeys, to support new color correction formula[*] Updated 3D renderer and benchmark module.
[F] Fixed situation when 3D renderer shows artefacts after using benchmark module.
[+] Added support for Avivo Colors correction. Hue/Saturation will only work on R5xx video boards. There are no way to activate them for old video board, so do not ask me about it.[*] Updated auto FAN control functionality for R5xx boards.[*] Updated system information module. Added basic information about Overdrive support.
[F] Fixed broken OSD functionality for Direct3D8 games and applications.
[F] Fixed detection of current 3D profile with no GI option included[*] Now Shared memory information about FreeVideo and Texture memory will be updated only if 3D game or application is active and OSD enabled.[*] Updated FlashOSD module. Added voltages information for X1xxx video boards and ASUS Video boards with FinTEK sensor (like 9600XT/9800XT)
[F] Fixed rendering procedure in FlashOSD module for some of non-alpabetical characters.
[F] Fixed bug when "Scale image to panel size" option doesn't work in certain situations.
[+] Updated support for HDTV modes. Added a few new modes. Only supported modes can be adjusted. Note some modes can be disabled in certaint situation, such as display rotation
[+] Added support for "Perserve Aspect Ratio" option in Display module. If supported by LCD or DFP display.
[F] Fixed bug with hotkey for decreasing contrast in color correction procedure.
[+] Added GPU and Memory Voltage control procedure for X1600/X1800/X19xx (if supported by hardware)[*] Monitoring Graphs window now will be automaticaly reopened after suspend mode if it was active before entering into Suspend mode.
[+] Added option to Force TV Detection. If you are using an older TV or one that has non-standard inputs that may not be automatically detected, use Force TV Detection.
[+] Added test support for X1300/X1600/X1800/X19xx Radeon video boards into TV Out/Display module.[*] Improved TV Out support for mobility chips. ATT has partial support for mobility chips, so do not expect a lot[*] Updated Core names database. Added information about RV570/RV535 chips.
[+] Added option to automatically shutdown "ATI HotKey Poller" for R5xx board. If you want to use overclocking functions in ATI Tray Tools for those video boards, you must always disable "ATI HotKey Poller" service to prevent from resetting clocks and voltages to default state.
[F] Fixed FlashOSD functionality corrected wrongly shown GPU/Memory speed for R5xx video board in 3D mode.
[+] Added localization support. Big thanks to all who helped to translate ATI Tray Tools into other languages.
[+] Added new command line parameters:
/LDSD - Load "Default Single Display" profile
/EXD - Turn Extended Desktop On/Off
[+] Added an ability to skip overclocking at start up. Just press left CTRL button while windows is loading.

http://www.radeon2.ru/atitray/attsetup.exe

Iron99 · Sep 19, 2006, 11:57 AM

Works like a charm on my system

.

SirRoxen · Sep 19, 2006, 12:20 PM

Thanks, seems to be working well for me as well.

Sound_Card · Sep 19, 2006, 03:23 PM

OMFG!!!!

this thing is the ****.

I thank you sooooooooooooo muuuuuuuccccccccchhhhhhhhh RAY ADAMS. I finally get to dump ATI tool.

Galmok · Sep 19, 2006, 03:34 PM

Caused TeamSpeak server to crash in raphook.dll. TS-server was started during the ATI Tray Tool upgrade so that could perhaps be the reason for the crash. This is just a guess, though.

Edit: Hmm more applications are crashing. I guess I have to reboot to prevent the whole system from crashing...

Edit: There was no crash upon reboot so I guess it works as intended now. But for everyone upgrading a running ATT you should reboot as soon as possible. ;-)

grendizer · Sep 19, 2006, 05:08 PM

Anyone got avivo colour working? Nothing changes when I set hue and saturation.

OC works great.

androgen · Sep 19, 2006, 05:36 PM

Doesn't save fan settings after reboot and for some reason the memory voltage setting won't work (resets to 2.086v when trying to apply).
Removed ATI Tool prior.

Sound_Card · Sep 19, 2006, 06:36 PM

Don't know...

It's working great here!

what cards do you guys have???

nutcrackr · Sep 19, 2006, 06:54 PM

Thanks for the headsup

androgen · Sep 19, 2006, 07:14 PM

Quote:

Originally Posted by Sound_Card

Don't know...

It's working great here!

what cards do you guys have???

Sapphire X1900XT 512

**Pirate Neilsouth** · Sep 19, 2006, 07:18 PM

Sweeeet

+ rep!

Raged_Fanatic · Sep 20, 2006, 12:27 AM

Works perfectly for my PowerColor X1900XT. Thanks!

SirRoxen · Sep 20, 2006, 12:49 AM

Quote:

Originally Posted by androgen

Doesn't save fan settings after reboot and for some reason the memory voltage setting won't work (resets to 2.086v when trying to apply).
Removed ATI Tool prior.

Are you saving the fan settings into a profile? And are you selecting load profile at startup?

And have you disabled the ati hotkey poller in services.msc?

androgen · Sep 20, 2006, 03:23 AM

yes to both

Ray Adams · Sep 20, 2006, 05:47 AM

For owners of X1xxx cards. Do not select OLD I2C Method ininstallation procedure or you will not be able to apply memory voltage. This will be fixed and I will release bug fix version in next few days.

Quote:

Caused TeamSpeak server to crash in raphook.dll. TS-server was started during the ATI Tray Tool upgrade so that could perhaps be the reason for the crash.

Put .exe file from this software into Auto overclocking exception list.

Quote:

Doesn't save fan settings after reboot and for some reason the memory voltage setting won't work (resets to 2.086v when trying to apply).

You do something wrong.
Here what you should do:
1. Set FAN Settings
2. Check box "Include in profile"
3. Save settings as profile
4. Select it from drop down list
5. check box "Load selected profile at start up"

eatyour1337ies · Sep 20, 2006, 06:50 AM

Oh boy, 2D/3D clocking and both VGpu and VMem working beautifully with my X1800GTO, thanks Ray! September isn't such a bad month afterall

Galmok · Sep 20, 2006, 07:37 AM

Quote:

Originally Posted by Ray Adams

Put .exe file from this software into Auto overclocking exception list.

Well, pretty much all applications that I mouse-overed in my system tray crashed in raphook.dll after the upgrade (got like 12 crash boxes) but once I rebooted, all applications worked just fine. Also, I don't use the ATT overclocking ability (is disabled during install). Perhaps you should suggest a reboot if the ATT setup utility performs an upgrade of a previous version?

androgen · Sep 20, 2006, 10:05 AM

Quote:

Originally Posted by Ray Adams

For owners of X1xxx cards. Do not select OLD I2C Method ininstallation procedure or you will not be able to apply memory voltage. This will be fixed and I will release bug fix version in next few days.

Put .exe file from this software into Auto overclocking exception list.

You do something wrong.
Here what you should do:
1. Set FAN Settings
2. Check box "Include in profile"
3. Save settings as profile
4. Select it from drop down list
5. check box "Load selected profile at start up"

Thanks for clearing up the voltage issue.
As for the fan settings, that's exactly the steps I took. Don't know, maybe I didn't do a proper uninstall of the older version or of ATI Tool.

Don't get me wrong, I didn't want to sound critical, I like your tool and been using it to replace CCC for the last 7 months.

**Pirate Neilsouth** · Sep 20, 2006, 12:10 PM

Is it normal for overclocks to go back to normal when i load a movie??

Is it normal for the screen to flick when i load a movie with ati hotkey poller disabled?

edit : WOW work a hell of alot better than ati tools NIIICE

nferguzl · Sep 20, 2006, 02:36 PM

Thanks Ray!! Overclock is now stable even in crossfire. I use atitool to overclock gpu 2 on startup, and ATT profiles to overclock the mastercard in games. Somehow atitool is unstable overclocking the master card. However, tray tools works great!!

PS: Ray, if you can somehow enable clocks for gpu 2 please do so, and atitool won't be needed anymore. It would also be awesome if you can enable other memory voltages found in atitool.

Apple740 · Sep 20, 2006, 03:06 PM

X1K OC support, Adams is finally back in town.

**Pirate Neilsouth** · Sep 20, 2006, 03:11 PM

Quote:

Originally Posted by Apple740

X1K OC support, Adams is finally back in town.

About time too , this **** rocks

{0}Salamander{0} · Sep 20, 2006, 03:14 PM

Nice.

You should be commended for your work.

Sound_Card · Sep 20, 2006, 03:17 PM

makes me wonder why ATI dose not steal him up?

**Pirate Neilsouth** · Sep 20, 2006, 05:28 PM

Ray Adams

Everytime i load Battlefield 2 or POE the clocks reset back to the 2D clocks and i have to ALT-TAB back to the desktop reset the clocks and ALT-TAB back to the game

Scassamazzo · Sep 20, 2006, 06:02 PM

Hello Ray, your tool is fantastic. I have a little problem when i overclock the card "x1900xtx" if i play a movie .wmw or the games like "fear" "ages of empire" the card switch to 2d clock and Ati Tray Tools non notify the change "with Ati Tool notify" this since the ati release the catalyst 6.4 or greater. If possible any workaround for this problem? The change is in the driver code, i disable all service with no success.
Sorry for my ****ty english.

**Pirate Neilsouth** · Sep 20, 2006, 06:26 PM

Quote:

Originally Posted by Scassamazzo

Hello Ray, your tool is fantastic. I have a little problem when i overclock the card "x1900xtx" if i play a movie .wmw or the games like "fear" "ages of empire" the card switch to 2d clock and Ati Tray Tools non notify the change "with Ati Tool notify" this since the ati release the catalyst 6.4 or greater. If possible any workaround for this problem? The change is in the driver code, i disable all service with no success.
Sorry for my ****ty english.

I understood your english and i get exactly the same problem as you

Emmet Otter · Sep 20, 2006, 07:05 PM

I cant even imagine anyone with an ATI card that wouldnt want to use this. I have used his previous versions and will continue to do so.

**Pirate Neilsouth** · Sep 20, 2006, 07:10 PM

Quote:

Originally Posted by Emmet Otter

I cant even imagine anyone with an ATI card that wouldnt want to use this. I have used his previous versions and will continue to do so.

forums up!
http://forums.guru3d.com/showthread.php?t=198408

Wouldnt want to do what?

This 3d switching thing is annoying me , why did ati invent such a thing... it keeps kicking the clocks back down to default with some games, EVEN with ati hot key poller disabled

I wonder if ati has something else in the driver causing this

I think im sticking with this , it works with 3d EVERYTIME just a little buggy sometimes crashs and no profile saving...

http://www.driverheaven.net/showthread.php?t=88559

But i get exactly the same scores with that application than i do with ati tool or ati tray tools

Napoleonic · Sep 21, 2006, 03:40 AM

I must ask here, does any of you with X1900 series capable to set the core clock to 650MHz using this ATT? mine couldn't, the closet clock is 648 and then jumped to 654 or so.....while Ati Tool capable to do 650.70, not really a problem but I don't like it

Sep 19, 2006, 09:37 AM	#1	Advertisement (Guests Only) Login or Register to remove this ad
spajdr gone... Join Date: Jun 2002 Location: Ostrava Posts: 2,556	ATI Tray Tools 1.2.6.930 [+] Added configuration dialog for Overdrive 3. You can use it if you don't want to overclock your board on low level or if you have a problem with low level overclocking. Remember this option will be active only if your video board support Overdrive version 3 and ATI HotKey poller service is started. [+] Added overclocking support for X1300/X1600/X1800/X1900. Memory overclocking for X1300 doesn't work in this release. Also remember that you must disable ATI HotKey poller if your board can operate in 2D/3D mode or your clocks always will be resets to ATI default clocks. Try do not overclock your board while any 3D games are active. Do it before launching game via game profiles it is a safest way.[] Updated color correction hotkeys, to support new color correction formula[] Updated 3D renderer and benchmark module. [F] Fixed situation when 3D renderer shows artefacts after using benchmark module. [+] Added support for Avivo Colors correction. Hue/Saturation will only work on R5xx video boards. There are no way to activate them for old video board, so do not ask me about it.[] Updated auto FAN control functionality for R5xx boards.[] Updated system information module. Added basic information about Overdrive support. [F] Fixed broken OSD functionality for Direct3D8 games and applications. [F] Fixed detection of current 3D profile with no GI option included[] Now Shared memory information about FreeVideo and Texture memory will be updated only if 3D game or application is active and OSD enabled.[] Updated FlashOSD module. Added voltages information for X1xxx video boards and ASUS Video boards with FinTEK sensor (like 9600XT/9800XT) [F] Fixed rendering procedure in FlashOSD module for some of non-alpabetical characters. [F] Fixed bug when "Scale image to panel size" option doesn't work in certain situations. [+] Updated support for HDTV modes. Added a few new modes. Only supported modes can be adjusted. Note some modes can be disabled in certaint situation, such as display rotation [+] Added support for "Perserve Aspect Ratio" option in Display module. If supported by LCD or DFP display. [F] Fixed bug with hotkey for decreasing contrast in color correction procedure. [+] Added GPU and Memory Voltage control procedure for X1600/X1800/X19xx (if supported by hardware)[] Monitoring Graphs window now will be automaticaly reopened after suspend mode if it was active before entering into Suspend mode. [+] Added option to Force TV Detection. If you are using an older TV or one that has non-standard inputs that may not be automatically detected, use Force TV Detection. [+] Added test support for X1300/X1600/X1800/X19xx Radeon video boards into TV Out/Display module.[] Improved TV Out support for mobility chips. ATT has partial support for mobility chips, so do not expect a lot[*] Updated Core names database. Added information about RV570/RV535 chips. [+] Added option to automatically shutdown "ATI HotKey Poller" for R5xx board. If you want to use overclocking functions in ATI Tray Tools for those video boards, you must always disable "ATI HotKey Poller" service to prevent from resetting clocks and voltages to default state. [F] Fixed FlashOSD functionality corrected wrongly shown GPU/Memory speed for R5xx video board in 3D mode. [+] Added localization support. Big thanks to all who helped to translate ATI Tray Tools into other languages. [+] Added new command line parameters: /LDSD - Load "Default Single Display" profile /EXD - Turn Extended Desktop On/Off [+] Added an ability to skip overclocking at start up. Just press left CTRL button while windows is loading. http://www.radeon2.ru/atitray/attsetup.exe __________________ ASUS Rampage II GENE + Intel i7-920 @ 3.8 GHz + Noctua NH-U12P SE1366 6 GB OCZ Intel Extreme XMP 1600MHz / Palit Geforce 295GTX 1792MB watercooled 1x30GB SSD OCZ Vertex Turbo (system) / 2x30GB SSD OCZ Vertex RAID 0 (games) 24" LCD DELL G2410 / Power supply Nexus RX-8500 850W / Asus OC STATION

Iron99's System Specs
Motherboard	ABIT IP35 Pro (Great MB)
CPU	Q9650 (EO) @ 3.8 (1.30V) on H2O
Graphics	nV GTX 280 @ 700/1500/1200
Memory	4GB's DDR2 (1 to 1)
Cooling Solution	Koolance EXOS2 cooling both CPU and GPU
Display	Dell 2405 24" LCD
Soundcard & Speakers	X-Fi and Creative 350Watt 5.1
Hard-Drives	2X74GB Raptors/RAID0 (OS)2xWD 500GB(1 Apps./1 My Docs)36GB Raptor(Index/Pagefile)1.5TB WD Backup.
Optical Drives	DVD-RW USB2 External
Power Supply	1000 Wat Silverstone, single 12V rail.
Case	Modified ABS Aplus Full Tower
Input Devices	ECCI 6000GTS Wheel, Frex H-Shift+, Logitech MX518 and G15
Operating System	Vista Ultimate 64 Bit, SP2

Sep 19, 2006, 12:20 PM	#3
SirRoxen Shwing shwong Join Date: Feb 2004 Location: Idaho Posts: 4,898	Thanks, seems to be working well for me as well. __________________

SirRoxen's System Specs
Motherboard	Biostar Ta790gx A2+
CPU	AMD Phenom 9600 BE @ 2.5ghz 1.31v
Graphics	ATi XFX HD4870 1gb 775/1100
Memory	2x2024mb OCZ DDR2
Cooling Solution	Air Cooling
Display	Samsung T220 LCD
Soundcard & Speakers	X-Fi Xtrememusic & Antec 2.1 & Icemat Siberia Headphones
Hard-Drives	WD 250gb, WD640gb, Seagate 7200.10 250gb, all SATA
Optical Drives	Lite-On Cd-r/rw DVD combo
Power Supply	OCZ StealthXstream 600w
Case	Coolermaster Centurion 532
Input Devices	Razer Arctosa Keyboard, Mx518
Operating System	Vista Ultimate 64 bit edition

Sound_Card's System Specs
Motherboard	DFI LanParty DK-TR2 x38
CPU	Intel Core2 Q9300 @ 3.0ghz
Graphics	Sapphire Toxic HD 4850
Memory	4x1gb G.Skill DDR2 800 (5-5-5-15)
Cooling Solution	Zalman 9700LED
Display	Hanns G 21.6" HDMI
Soundcard & Speakers	AuzenTech X-Mystique & Sony audio control center 2.0
Hard-Drives	Seagate Barracuda 250gb 16mb SATA II
Optical Drives	Samsung DVD/CD-ROM
Power Supply	PC power & Cooling 610w Silencer
Case	Xclio wind tunnel
Operating System	Windows Vista home premium x64 sp1

Sep 19, 2006, 03:23 PM	#4
Sound_Card Wii do what? Join Date: Apr 2006 Location: San Antonio Posts: 10,025	OMFG!!!! this thing is the ****. I thank you sooooooooooooo muuuuuuuccccccccchhhhhhhhh RAY ADAMS. I finally get to dump ATI tool.

Sep 19, 2006, 03:34 PM	#5
Galmok Radeon HD 4870 X2 Join Date: May 2003 Posts: 542	Caused TeamSpeak server to crash in raphook.dll. TS-server was started during the ATI Tray Tool upgrade so that could perhaps be the reason for the crash. This is just a guess, though. Edit: Hmm more applications are crashing. I guess I have to reboot to prevent the whole system from crashing... Edit: There was no crash upon reboot so I guess it works as intended now. But for everyone upgrading a running ATT you should reboot as soon as possible. ;-) Last edited by Galmok : Sep 19, 2006 at 03:47 PM.

Galmok's System Specs
Motherboard	Gigabyte GA-EX58-UD3R
CPU	Core i7 920
Graphics	ATI 4870
Memory	6GB (3X2GB) OCZ DDR3 GOLD XTC PC12800
Power Supply	Seasonic S12 500W

Sep 19, 2006, 05:08 PM	#6
grendizer Radeon HD 4600 Join Date: May 2006 Posts: 75	Anyone got avivo colour working? Nothing changes when I set hue and saturation. OC works great.

Sep 19, 2006, 05:36 PM	#7
androgen Radeon HD 4850 Join Date: Jun 2003 Posts: 233	Doesn't save fan settings after reboot and for some reason the memory voltage setting won't work (resets to 2.086v when trying to apply). Removed ATI Tool prior.

Sep 19, 2006, 06:36 PM	#8
Sound_Card Wii do what? Join Date: Apr 2006 Location: San Antonio Posts: 10,025	Don't know... It's working great here! what cards do you guys have???

Sep 19, 2006, 06:54 PM	#9
nutcrackr Rage3D Veteran Join Date: Aug 2003 Location: over the rainbow, way up high Posts: 6,157	Thanks for the headsup

nutcrackr's System Specs
Motherboard	GA-MA790GPT-UD3H
CPU	AMD Phenom(tm) II X4 955
Graphics	Sapphire ATI Radeon HD 5850
Memory	2x2GB OCZ DD3 10600c7
Display	Samsung Syncmaster 2494HS 1920x1080 @ 24 inches
Soundcard & Speakers	Onboard Realtek ALC883
Hard-Drives	Samsung 1TB, Seagate 320GB SATA 2, WD 640GB SATA 2, WD 200GB
Optical Drives	Pioneer 109 DVD RW, Pioneer 215 DVD+RW
Power Supply	Cosair TX-750W
Case	Antec 1080 AMG
Input Devices	MS Digital Media Pro Keyboard, Logitech MX518 mouse
Operating System	Microsoft Windows 7 Ultimate 64 Bit
Extra Info	Compro DVB-T300 (TV Card)

Sep 19, 2006, 07:18 PM	#11
Pirate Neilsouth Pissed Pirate Join Date: Feb 2006 Location: Somewhere on mars! Posts: 21,004	Sweeeet + rep!

Pirate Neilsouth's System Specs
Motherboard	ASRock Penryn1600SLI-110d
CPU	Q6600 @ 3030MHZ
Graphics	Palit GTX260(overclocked)
Memory	8GB @ 338MHZ
Cooling Solution	Oem Cooler
Display	SyncMaster T240
Soundcard & Speakers	Creative XFI-GAMER
Hard-Drives	Hitachi 500GB
Power Supply	Winpower 750Watt
Case	Thermaltake Soprano
Input Devices	Microsoft intellimouse optical , Logitech keyboard
Operating System	Windows 7

Sep 20, 2006, 12:27 AM	#12
Raged_Fanatic Banned Join Date: Apr 2006 Location: Fort Myers, FL Posts: 1,774	Works perfectly for my PowerColor X1900XT. Thanks!

Sep 20, 2006, 03:23 AM	#14
androgen Radeon HD 4850 Join Date: Jun 2003 Posts: 233	yes to both

Sep 20, 2006, 06:50 AM	#16
eatyour1337ies Rage's Hardon Collider Join Date: Jul 2002 Location: Pouring Glug into UDHATown Posts: 1,306	Oh boy, 2D/3D clocking and both VGpu and VMem working beautifully with my X1800GTO, thanks Ray! September isn't such a bad month afterall __________________ yan yan > snu snu

eatyour1337ies's System Specs
Motherboard	DFI DK P35-T2RS
CPU	Q6600 @ 3400 (lapped)
Graphics	8800GT @ 802/1998/999
Memory	4 x Ballistix D9GMH (DDR878 4-4-4-12 @ 2.08v)
Cooling Solution	TRUE lapped/washers applied 2xPTS Yate Loon, Arctic Cooling S1 w/2x12cm fannage
Display	Samsung 225BW
Soundcard & Speakers	Audigy 2 ZS, Logitech Z680 (modded)
Hard-Drives	Seagate 7200.10 320GB, Hitachi 7K160
Optical Drives	Pioneer DVR-212, BenQ DW1655 BCGB (USB)
Power Supply	Silverstone OP650
Case	Antec 900 (fixed horrible cable management)
Input Devices	BTC 6100 mini board, Zboard Fang, Razer Deathadder @ 1800cpi/1KHz on C4Ngen04
Operating System	Windows 7 x64
Extra Info	Sucks up dust like nothing else

Sep 20, 2006, 12:10 PM	#19
Pirate Neilsouth Pissed Pirate Join Date: Feb 2006 Location: Somewhere on mars! Posts: 21,004	Is it normal for overclocks to go back to normal when i load a movie?? Is it normal for the screen to flick when i load a movie with ati hotkey poller disabled? edit : WOW work a hell of alot better than ati tools NIIICE Last edited by Pirate Neilsouth : Sep 20, 2006 at 12:19 PM.

Sep 20, 2006, 02:36 PM	#20
nferguzl x1900xt Join Date: Dec 2002 Posts: 218	Thanks Ray!! Overclock is now stable even in crossfire. I use atitool to overclock gpu 2 on startup, and ATT profiles to overclock the mastercard in games. Somehow atitool is unstable overclocking the master card. However, tray tools works great!! PS: Ray, if you can somehow enable clocks for gpu 2 please do so, and atitool won't be needed anymore. It would also be awesome if you can enable other memory voltages found in atitool. __________________ Asus Rampage Formula, Intel q9450, 2xHD2900xt, Gskill DDR1000 2x2gb, X-Fi Fatal1ty, 2xWD Raptors Raid0, Logitech g7 mouse, g15 keyboard, Dell 2405fpw, Enermax Galaxy 1kw DXX, Vista x64

Sep 20, 2006, 03:06 PM	#21
Apple740 Radeon X1800XT Join Date: Aug 2004 Location: Rotterdam - NL Posts: 558	X1K OC support, Adams is finally back in town. __________________ XFX 8800GTX \| Opteron 146@2,7 \| DFI NF4 Ultra-D \| 2x1GB Kingston \| 22" CRT Compaq P1220

Sep 20, 2006, 03:14 PM	#23
{0}Salamander{0} Radeon Man Returneth Join Date: Aug 2005 Location: Birmingham, UK Posts: 2,347	Nice. You should be commended for your work. __________________

{0}Salamander{0}'s System Specs
Motherboard	Asus P6T Deluxe V2
CPU	Intel i7 920 D0 stepping
Graphics	Sapphire 5870 1GB
Memory	6GB Corsair XMS3 DDR1600 CL7
Display	HP 2207
Hard-Drives	1TB Samsung Spinpoint F1
Optical Drives	Pioneer DVD-RW
Power Supply	Thermaltake 750W
Case	Antec P160
Operating System	Windows 7 Pro - 64bit

Sep 20, 2006, 03:17 PM	#24
Sound_Card Wii do what? Join Date: Apr 2006 Location: San Antonio Posts: 10,025	makes me wonder why ATI dose not steal him up?

Sep 20, 2006, 05:28 PM	#25
Pirate Neilsouth Pissed Pirate Join Date: Feb 2006 Location: Somewhere on mars! Posts: 21,004	Ray Adams Everytime i load Battlefield 2 or POE the clocks reset back to the 2D clocks and i have to ALT-TAB back to the desktop reset the clocks and ALT-TAB back to the game Last edited by Pirate Neilsouth : Sep 20, 2006 at 05:34 PM.

Sep 20, 2006, 06:02 PM	#26
Scassamazzo Radeon HD 4600 Join Date: Aug 2003 Location: ITALY Posts: 57	Hello Ray, your tool is fantastic. I have a little problem when i overclock the card "x1900xtx" if i play a movie .wmw or the games like "fear" "ages of empire" the card switch to 2d clock and Ati Tray Tools non notify the change "with Ati Tool notify" this since the ati release the catalyst 6.4 or greater. If possible any workaround for this problem? The change is in the driver code, i disable all service with no success. Sorry for my ***ty english. Last edited by Scassamazzo : Sep 20, 2006 at 06:07 PM.*

Sep 20, 2006, 07:05 PM	#28
Emmet Otter I mend fences Join Date: Oct 2002 Location: Frogtown Hollow Posts: 2,930	I cant even imagine anyone with an ATI card that wouldnt want to use this. I have used his previous versions and will continue to do so. __________________

Emmet Otter's System Specs
Motherboard	ASUS P5E WS Professional
CPU	Intel Q6600 @3.6 ~ on air 44c avg
Graphics	EVGA 8800GTS 512MB @670/1940
Memory	Corsair Dominator DDR2 1066 2gig ~ 5-5-5-15 2.5v
Cooling Solution	ZALMAN CNPS9500 LED 92mm
Display	ViewSonic G810 21" crt rulez!
Soundcard & Speakers	Crative Audigy2 ZS
Hard-Drives	a bunch of western digitals
Power Supply	COOLER MASTER Real Power Pro RS-750w
Case	CM Stacker :)
Input Devices	Logitech LX3 optical mouse
Operating System	Win XP Pro SP2
Extra Info	there is no god, there's only Carl Sagan :)

Sep 21, 2006, 03:40 AM	#30
Napoleonic Rage3D Veteran Join Date: Mar 2005 Posts: 2,249	I must ask here, does any of you with X1900 series capable to set the core clock to 650MHz using this ATT? mine couldn't, the closet clock is 648 and then jumped to 654 or so.....while Ati Tool capable to do 650.70, not really a problem but I don't like it __________________ always trying to be better.

Napoleonic's System Specs
Motherboard	DFI DK X58 T3eH6
CPU	Niu-hay-lem Bloomfield 920
Graphics	Force 3D HD4850 1GB
Memory	3x2GB Gskill 1600MHz CL9
Cooling Solution	Noctua U12P SE1366
Display	Samsung P2370 1920x1080
Soundcard & Speakers	Onkyo Wavio SE-200 PCI to Denon AVR-2106
Hard-Drives	WD 320GB SATA2 16MB
Optical Drives	Lite-On SOHC-5232K, Pioneer DVR 111DBK, Lite On LH-20A1P flashed to DW2000
Power Supply	Antec Earthwatts EA650
Case	TT Kandalf Silver
Input Devices	standard
Operating System	Vista 64 SP1

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode