Go Back   Rage3D » Rage3D Discussion Area » Archived Discussions » Linux » Drivers
Rage3D Subscribe Register FAQ Members List Calendar Mark Forums Read

Drivers Discussion forum for Linux drivers.

Reply
 
Thread Tools Display Modes
Old Jan 8, 2005, 04:29 AM   #1
Advertisement (Guests Only)

Login or Register to remove this ad
mtippett
ATI Linux Manager
 
Join Date: Aug 2003
Location: Toronto
Posts: 292
mtippett is still being judged by the masses


Default Patch for drivers against 2.6.10

Hi.

Find attached a patch against the upcoming drivers that will be required for 2.6.10 kernels. It should apply with warnings against older drivers - but I will leave that as an exercise for the reader. This will not be present in the soon to be released drivers (8.8) - they have already gone 'gold' so to speak, but will be in subsequent releases (8.10 and beyond).

It handles the API change - both syntactic and semantic regarding the pci_find_class call as well as some header file movements regarding lock_page.

Regards,

Matthew

PS you may have noticed that the version major.minor is now predictable... We will always talk about a driver in the 8.8, 8.10, etc stream... The patch level carries little information apart from the fact that patches have been applied.
Code:
--- agpgart_be.c 2005-01-06 9:05:02.000000000 +0100
+++ agpgart_be.c 2005-01-06 9:19:16.000000000 +0100

@@ -255,6 +255,12 @@
 }
 #endif
 
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10) 
+#define firegl_pci_find_class(class,from) pci_get_class(class,from)
+#else
+#define firegl_pci_find_class(class,from) pci_find_class(class,from)
+#endif
+
 int agp_backend_acquire(void)
 {
 	if (agp_bridge.type == NOT_SUPPORTED) {
@@ -718,7 +724,7 @@
 	 *        AGP devices and collect their data.
 	 */
 
-	while ((device = pci_find_class(PCI_CLASS_DISPLAY_VGA << 8,
+	while ((device = firegl_pci_find_class(PCI_CLASS_DISPLAY_VGA << 8,
 					device)) != NULL) {
 		pci_read_config_dword(device, 0x04, &scratch);
 
@@ -794,6 +800,13 @@
 				command &= ~0x00000001;
 		}
 	}
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10) 
+            // the reference count has been increased in agp_backend_initialize.
+        if (device)
+            pci_dev_put(device); 
+#endif
+
 	/*
 	 * PASS2: Figure out the 4X/2X/1X setting and enable the
 	 *        target (our motherboard chipset).
@@ -839,8 +852,9 @@
 	 *        command registers.
 	 */
 
-	while ((device = pci_find_class(PCI_CLASS_DISPLAY_VGA << 8,
+	while ((device = firegl_pci_find_class(PCI_CLASS_DISPLAY_VGA << 8,
 					device)) != NULL) {
+
 		pci_read_config_dword(device, 0x04, &scratch);
 
 		if (!(scratch & 0x00100000))
@@ -871,6 +885,12 @@
         }
 	}
 
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10) 
+            // the reference count has been increased in agp_backend_initialize.
+        if (device)
+            pci_dev_put(device); 
+#endif
+
     return 0; /* success */
 }
 
@@ -5119,8 +5139,9 @@
 	 *        AGP devices and collect their data.
 	 */
 
-	while ((device = pci_find_class(PCI_CLASS_DISPLAY_VGA << 8,
+	while ((device = firegl_pci_find_class(PCI_CLASS_DISPLAY_VGA << 8,
 					device)) != NULL) {
+
 		pci_read_config_dword(device, 0x04, &scratch);
 
 		if (!(scratch & 0x00100000))
@@ -5187,6 +5208,13 @@
 				command &= ~0x00000001;
 		}
 	}
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10) 
+            // the reference count has been increased in agp_backend_initialize.
+        if (device)
+            pci_dev_put(device); 
+#endif
+
 	/*
 	 * PASS2: Figure out the 4X/2X/1X setting and enable the
 	 *        target (our motherboard chipset).
@@ -5217,8 +5245,9 @@
 	 *        command registers.
 	 */
 
-	while ((device = pci_find_class(PCI_CLASS_DISPLAY_VGA << 8,
+	while ((device = firegl_pci_find_class(PCI_CLASS_DISPLAY_VGA << 8,
 					device)) != NULL) {
+
 		pci_read_config_dword(device, 0x04, &scratch);
 
 		if (!(scratch & 0x00100000))
@@ -5249,6 +5278,12 @@
         }
 	}
 
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10) 
+            // the reference count has been increased in agp_backend_initialize.
+        if (device)
+            pci_dev_put(device); 
+#endif
+
     return(0); /* success */
 }
 
@@ -6494,10 +6529,10 @@
     // locate host bridge device
 #ifdef __x86_64__
     do {
-        dev = pci_find_class(PCI_CLASS_BRIDGE_HOST << 8, dev);
+        dev = firegl_pci_find_class(PCI_CLASS_BRIDGE_HOST << 8, dev);
     } while((dev) && !agp_check_supported_device(dev));
 #else
-    if ((dev = pci_find_class(PCI_CLASS_BRIDGE_HOST << 8, NULL)) == NULL)
+    if ((dev = firegl_pci_find_class(PCI_CLASS_BRIDGE_HOST << 8, NULL)) == NULL)
         return -ENODEV;
 #endif
 
@@ -7040,8 +7075,12 @@
                     &agp_bridge.mode);
 				return hp_zx1_setup(dev);
 			}
-			dev = pci_find_class(PCI_CLASS_BRIDGE_HOST << 8, dev);
+			dev = firegl_pci_find_class(PCI_CLASS_BRIDGE_HOST << 8, dev);
 		} while (dev);
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10) 
+                if(dev) pci_dev_put(dev);
+#endif
 		return -ENODEV;
 	}
 #endif	/* __ia64__ */
@@ -7462,6 +7501,11 @@
 	agp_bridge.free_gatt_table();
 	vfree(agp_bridge.key_list);
 
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10)
+        // decrease the reference count.
+        pci_dev_put(agp_bridge.dev);
+#endif
+
 	if (agp_bridge.needs_scratch_page == TRUE) {
 		agp_bridge.scratch_page &= ~(0x00000fff);
 		agp_bridge.agp_destroy_page((unsigned long)


--- firegl_public.c 2005-01-06 9:05:02.000000000 +0100
+++ firegl_public.c 2005-01-06 9:19:16.000000000 +0100
@@ -88,6 +88,7 @@
 #include <linux/smp_lock.h>
 // newer SuSE kernels need this
 #include <linux/highmem.h>
+#include <linux/pagemap.h> // for lock_page and unlock_page
 
 #if defined(__ia64__)
 #include <linux/vmalloc.h>
__________________
Lenovo T43p + Ubuntu Intrepid + Mobility FireGL v3200 + 1GB RAM
mtippett is offline   Reply With Quote
Old Jan 8, 2005, 05:46 AM   #2
Exxtreme
Rage3D Veteran
 
Join Date: Oct 2001
Location: Germany Germany
Posts: 1,419
Exxtreme is still being judged by the masses


Default

That's the reason why i love Gentoo linux. All you need is an "emerge ati-drivers" and all necessary patches will be applied before the installation.

Last edited by Exxtreme : Jan 8, 2005 at 05:50 AM.
Exxtreme is offline   Reply With Quote
Old Jan 8, 2005, 06:15 AM   #3
FCA
Newbie
 
Join Date: Jan 2005
Posts: 18
FCA is still being judged by the masses


Default

Ah good. I assume we need a seperate patch for this driver to work on 2.6.10-mmX kernels?
I get a compile error with it, someone moved some stuff around. Note that the offending patch is in the linus.patch part of mm, making it a virtual certainty that it will be in 2.6.11...

Error:
Code:
make: Entering directory `/usr/src/linux-2.6.10-mm2'
  CC [M]  /var/tmp/portage/ati-drivers-3.14.6/work/lib/modules/fglrx/build_mod/agp3.o
  CC [M]  /var/tmp/portage/ati-drivers-3.14.6/work/lib/modules/fglrx/build_mod/nvidia-agp.o
  CC [M]  /var/tmp/portage/ati-drivers-3.14.6/work/lib/modules/fglrx/build_mod/agpgart_be.o
/var/tmp/portage/ati-drivers-3.14.6/work/lib/modules/fglrx/build_mod/agpgart_be.c: In function `__fgl_agp_init':
/var/tmp/portage/ati-drivers-3.14.6/work/lib/modules/fglrx/build_mod/agpgart_be.c:7470: warning: `pm_register' is deprecated (declared at include/linux/pm.h:106)
/var/tmp/portage/ati-drivers-3.14.6/work/lib/modules/fglrx/build_mod/agpgart_be.c: In function `__fgl_agp_cleanup':
/var/tmp/portage/ati-drivers-3.14.6/work/lib/modules/fglrx/build_mod/agpgart_be.c:7480: warning: `pm_unregister_all' is deprecated (declared at include/linux/pm.h:116)
  CC [M]  /var/tmp/portage/ati-drivers-3.14.6/work/lib/modules/fglrx/build_mod/i7505-agp.o
  CC [M]  /var/tmp/portage/ati-drivers-3.14.6/work/lib/modules/fglrx/build_mod/firegl_public.o
In file included from drivers/char/drm/drm_proc.h:40,
                 from /var/tmp/portage/ati-drivers-3.14.6/work/lib/modules/fglrx/build_mod/firegl_public.c:311:
drivers/char/drm/drmP.h:786: error: conflicting types for 'drm_vm_open'
/var/tmp/portage/ati-drivers-3.14.6/work/lib/modules/fglrx/build_mod/firegl_public.h:123: error: previous declaration of 'drm_vm_open' was here
drivers/char/drm/drmP.h:786: error: conflicting types for 'drm_vm_open'
/var/tmp/portage/ati-drivers-3.14.6/work/lib/modules/fglrx/build_mod/firegl_public.h:123: error: previous declaration of 'drm_vm_open' was here
drivers/char/drm/drmP.h:787: error: conflicting types for 'drm_vm_close'
/var/tmp/portage/ati-drivers-3.14.6/work/lib/modules/fglrx/build_mod/firegl_public.h:124: error: previous declaration of 'drm_vm_close' was here
drivers/char/drm/drmP.h:787: error: conflicting types for 'drm_vm_close'
/var/tmp/portage/ati-drivers-3.14.6/work/lib/modules/fglrx/build_mod/firegl_public.h:124: error: previous declaration of 'drm_vm_close' was here
In file included from /var/tmp/portage/ati-drivers-3.14.6/work/lib/modules/fglrx/build_mod/firegl_public.c:311:
drivers/char/drm/drm_proc.h: In function `FGLDRM_name_info':
drivers/char/drm/drm_proc.h:186: error: structure has no member named `name'
drivers/char/drm/drm_proc.h:189: error: structure has no member named `name'
/var/tmp/portage/ati-drivers-3.14.6/work/lib/modules/fglrx/build_mod/firegl_public.c: In function `firegl_stub_putminor':
/var/tmp/portage/ati-drivers-3.14.6/work/lib/modules/fglrx/build_mod/firegl_public.c:519: warning: `inter_module_put' is deprecated (declared at include/linux/module.h:577)
/var/tmp/portage/ati-drivers-3.14.6/work/lib/modules/fglrx/build_mod/firegl_public.c:521: warning: `inter_module_unregister' is deprecated (declared at include/linux/module.h:573)
/var/tmp/portage/ati-drivers-3.14.6/work/lib/modules/fglrx/build_mod/firegl_public.c: In function `firegl_stub_register':
/var/tmp/portage/ati-drivers-3.14.6/work/lib/modules/fglrx/build_mod/firegl_public.c:541: warning: `inter_module_register' is deprecated (declared at include/linux/module.h:572)
/var/tmp/portage/ati-drivers-3.14.6/work/lib/modules/fglrx/build_mod/firegl_public.c:572: warning: `inter_module_put' is deprecated (declared at include/linux/module.h:577)
/var/tmp/portage/ati-drivers-3.14.6/work/lib/modules/fglrx/build_mod/firegl_public.c: In function `__ke_block_all_signals':
/var/tmp/portage/ati-drivers-3.14.6/work/lib/modules/fglrx/build_mod/firegl_public.c:815: warning: passing arg 1 of `block_all_signals' from incompatible pointer type
/var/tmp/portage/ati-drivers-3.14.6/work/lib/modules/fglrx/build_mod/firegl_public.c: In function `__ke_get_vm_phys_addr':
/var/tmp/portage/ati-drivers-3.14.6/work/lib/modules/fglrx/build_mod/firegl_public.c:1598: warning: passing arg 1 of `pmd_offset' from incompatible pointer type
/var/tmp/portage/ati-drivers-3.14.6/work/lib/modules/fglrx/build_mod/firegl_public.c: In function `__ke_request_irq':
/var/tmp/portage/ati-drivers-3.14.6/work/lib/modules/fglrx/build_mod/firegl_public.c:1908: warning: assignment from incompatible pointer type
/var/tmp/portage/ati-drivers-3.14.6/work/lib/modules/fglrx/build_mod/firegl_public.c: In function `do_vm_shm_nopage':
/var/tmp/portage/ati-drivers-3.14.6/work/lib/modules/fglrx/build_mod/firegl_public.c:2069: warning: passing arg 1 of `pmd_offset' from incompatible pointer type
/var/tmp/portage/ati-drivers-3.14.6/work/lib/modules/fglrx/build_mod/firegl_public.c: In function `__ke_vm_phys_addr_str':
/var/tmp/portage/ati-drivers-3.14.6/work/lib/modules/fglrx/build_mod/firegl_public.c:2440: warning: passing arg 1 of `pmd_offset' from incompatible pointer type
/var/tmp/portage/ati-drivers-3.14.6/work/lib/modules/fglrx/build_mod/firegl_public.c: At top level:
/var/tmp/portage/ati-drivers-3.14.6/work/lib/modules/fglrx/build_mod/firegl_public.c:2528: warning: initialization from incompatible pointer type
/var/tmp/portage/ati-drivers-3.14.6/work/lib/modules/fglrx/build_mod/firegl_public.c: In function `__ke_vm_map':
/var/tmp/portage/ati-drivers-3.14.6/work/lib/modules/fglrx/build_mod/firegl_public.c:2589: warning: implicit declaration of function `remap_page_range'
/var/tmp/portage/ati-drivers-3.14.6/work/lib/modules/fglrx/build_mod/firegl_public.c: In function `__ke_agp_uninit':
/var/tmp/portage/ati-drivers-3.14.6/work/lib/modules/fglrx/build_mod/firegl_public.c:3014: warning: `inter_module_put' is deprecated (declared at include/linux/module.h:577)
/var/tmp/portage/ati-drivers-3.14.6/work/lib/modules/fglrx/build_mod/firegl_public.c: In function `__ke_agp_allocate_memory':
/var/tmp/portage/ati-drivers-3.14.6/work/lib/modules/fglrx/build_mod/firegl_public.c:3058: warning: passing arg 1 of pointer to function makes pointer from integer without a cast
/var/tmp/portage/ati-drivers-3.14.6/work/lib/modules/fglrx/build_mod/firegl_public.c:3058: error: too few arguments to function
/var/tmp/portage/ati-drivers-3.14.6/work/lib/modules/fglrx/build_mod/firegl_public.c: In function `__ke_agp_enable':
/var/tmp/portage/ati-drivers-3.14.6/work/lib/modules/fglrx/build_mod/firegl_public.c:3092: warning: passing arg 1 of pointer to function makes pointer from integer without a cast
/var/tmp/portage/ati-drivers-3.14.6/work/lib/modules/fglrx/build_mod/firegl_public.c:3092: error: too few arguments to function
/var/tmp/portage/ati-drivers-3.14.6/work/lib/modules/fglrx/build_mod/firegl_public.c: In function `__ke_agp_acquire':
/var/tmp/portage/ati-drivers-3.14.6/work/lib/modules/fglrx/build_mod/firegl_public.c:3139: error: too few arguments to function
/var/tmp/portage/ati-drivers-3.14.6/work/lib/modules/fglrx/build_mod/firegl_public.c:3139: warning: return makes integer from pointer without a cast
/var/tmp/portage/ati-drivers-3.14.6/work/lib/modules/fglrx/build_mod/firegl_public.c: In function `__ke_agp_release':
/var/tmp/portage/ati-drivers-3.14.6/work/lib/modules/fglrx/build_mod/firegl_public.c:3150: error: too few arguments to function
/var/tmp/portage/ati-drivers-3.14.6/work/lib/modules/fglrx/build_mod/firegl_public.c: In function `__ke_agp_copy_info':
/var/tmp/portage/ati-drivers-3.14.6/work/lib/modules/fglrx/build_mod/firegl_public.c:3170: warning: passing arg 1 of pointer to function from incompatible pointer type
/var/tmp/portage/ati-drivers-3.14.6/work/lib/modules/fglrx/build_mod/firegl_public.c:3170: error: too few arguments to function
make[1]: *** [/var/tmp/portage/ati-drivers-3.14.6/work/lib/modules/fglrx/build_mod/firegl_public.o] Error 1
make: *** [_module_/var/tmp/portage/ati-drivers-3.14.6/work/lib/modules/fglrx/build_mod] Error 2
make: Leaving directory `/usr/src/linux-2.6.10-mm2'
I have no clue where to start patching this. The deprecations are only warnings, but those will be errors in the future I guess. The incompatible pointer type warnings seem harmless, but I have no clue how they influence the drivers behaviour.
FCA is offline   Reply With Quote
Advertisement (Guests Only)
Login or Register to remove this ad
Old Jan 8, 2005, 10:31 AM   #4
d4rk74m4
Radeon R520
 
Join Date: Jun 2004
Location: Hobart/Australia
Posts: 541
d4rk74m4 is still being judged by the masses


Default

FCA, you need to copy drm.h drmP.h and drm_proc.h from a vanilla kernel to compile 3.14.6 against 2.6.10-mm1, see this post for how I got it to work:
http://www.rage3d.com/board/showpost...9&postcount=11
d4rk74m4 is offline   Reply With Quote
Old Jan 8, 2005, 01:10 PM   #5
Swoosh
Newbie
 
Join Date: Jan 2005
Posts: 4
Swoosh is still being judged by the masses


Default

Does this mean that the new drivers (8.8) may be coming very soon?
Swoosh is offline   Reply With Quote
Old Jan 8, 2005, 03:17 PM   #6
arokh-
Radeon R100
 
Join Date: Dec 2004
Location: Oslo
Posts: 45
arokh- is still being judged by the masses


Default

Excellent! Just knowing that the new drivers will run well on my bleeding edge system gives me some comfort. Right now working drivers are most important to me.

Thanks for the patch and update mr Tippett!
__________________
Shuttle SN95G5 / AMD64 3500+ @ 2.6GHz (1.55v) / 1GB PC3200 Kingston HyperX ULL / MSI NX6800GT TD256
arokh- is offline   Reply With Quote
Old Jan 8, 2005, 03:37 PM   #7
mtippett
ATI Linux Manager
 
Join Date: Aug 2003
Location: Toronto
Posts: 292
mtippett is still being judged by the masses


Default

Quote:
Originally Posted by arokh-
Excellent! Just knowing that the new drivers will run well on my bleeding edge system gives me some comfort. Right now working drivers are most important to me.

Thanks for the patch and update mr Tippett!
Don't thank me, it is the team that works for me that does the real work. So thank ATI's Linux team.

Regards,

Matthew
__________________
Lenovo T43p + Ubuntu Intrepid + Mobility FireGL v3200 + 1GB RAM
mtippett is offline   Reply With Quote
Old Jan 17, 2005, 04:23 PM   #8
black hole sun
Hey guys!
 
Join Date: Jun 2003
Location: California
Posts: 5,233
black hole sun is still being judged by the masses


Default

I am an idiot, nevermind
__________________
The inhabitants of the earth are of two sorts:
Those with brains, but no religion,
And those with religion, but no brains.

-- Abul Ala al-Ma`arri, 1057 A.D.

Last edited by black hole sun : Jan 17, 2005 at 04:27 PM.
black hole sun is offline   Reply With Quote
Old Jan 17, 2005, 07:15 PM   #9
EVAPilot
Radeon R100
 
Join Date: Apr 2002
Location: London, UK
Posts: 35
EVAPilot is still being judged by the masses


Default

Nitro/CK/2.6.11 users should refer to:
http://www.rage3d.com/board/showpost...6&postcount=52
__________________
IBM ThinkPad T42, Centrino 1.75Ghz Dothan, 1GB RAM, Radeon Mobility 9600, 14" SXGA+. Fedora Core 3 on 2.6.11-rc1-love1
Linux-DCCP
EVAPilot is offline   Reply With Quote
Old Jan 17, 2005, 07:17 PM   #10
Exxtreme
Rage3D Veteran
 
Join Date: Oct 2001
Location: Germany Germany
Posts: 1,419
Exxtreme is still being judged by the masses


Default

mtippett's patch works very well for me. I have installed the driver without any problem on the 2.6.10 kernel.
Exxtreme is offline   Reply With Quote
Old Jan 17, 2005, 07:41 PM   #11
nik1982
Newbie
 
Join Date: Nov 2004
Posts: 20
nik1982 is still being judged by the masses


Default mm-sources

With mm-sources i always get this errors:



CC [M] /var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/agp3.o
CC [M] /var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/nvidia-agp.o
CC [M] /var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/agpgart_be.o
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/agpgart_be.c: In function `x86_64_insert_memory':
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/agpgart_be.c:3791: Warnung: Ganzzahlkonstante ist zu groß für »long«-Typ
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/agpgart_be.c: In function `agp_find_supported_device':
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/agpgart_be.c:6499: Warnung: Variable »cap_ptr« wird nicht verwendet
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/agpgart_be.c: In function `__fgl_agp_init':
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/agpgart_be.c:7575: Warnung: »pm_register« ist veraltet (deklariert bei include
/linux/pm.h:106)
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/agpgart_be.c: In function `__fgl_agp_cleanup':
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/agpgart_be.c:7585: Warnung: »pm_unregister_all« ist veraltet (deklariert bei i
nclude/linux/pm.h:116)
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/agpgart_be.c: At top level:
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/agpgart_be.c:6480: Warnung: »agp_check_supported_device« definiert, aber nicht
verwendet
CC [M] /var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/i7505-agp.o
CC [M] /var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/firegl_public.o
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/firegl_public.c: In function `firegl_stub_putminor':
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/firegl_public.c:503: Warnung: »inter_module_put« ist veraltet (deklariert bei
include/linux/module.h:578)
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/firegl_public.c:505: Warnung: »inter_module_unregister« ist veraltet (deklarie
rt bei include/linux/module.h:574)
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/firegl_public.c: In function `firegl_stub_register':
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/firegl_public.c:525: Warnung: »inter_module_register« ist veraltet (deklariert
bei include/linux/module.h:573)
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/firegl_public.c:556: Warnung: »inter_module_put« ist veraltet (deklariert bei
include/linux/module.h:578)
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/firegl_public.c: In function `__ke_get_vm_phys_addr':
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/firegl_public.c:1578: Warnung: Verarbeiten des Argumentes 1 von »pmd_offset« v
on inkompatiblem Zeigertyp
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/firegl_public.c: In function `do_vm_shm_nopage':
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/firegl_public.c:2073: Warnung: Verarbeiten des Argumentes 1 von »pmd_offset« v
on inkompatiblem Zeigertyp
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/firegl_public.c: In function `__ke_vm_phys_addr_str':
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/firegl_public.c:2444: Warnung: Verarbeiten des Argumentes 1 von »pmd_offset« v
on inkompatiblem Zeigertyp
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/firegl_public.c: At top level:
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/firegl_public.c:2532: Warnung: Initialisierung von inkompatiblem Zeigertyp
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/firegl_public.c: In function `__ke_agp_uninit':
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/firegl_public.c:3018: Warnung: »inter_module_put« ist veraltet (deklariert bei
include/linux/module.h:578)
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/firegl_public.c: In function `__ke_agp_allocate_memory':
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/firegl_public.c:3062: Warnung: Verarbeiten des Argumentes 1 von Zeiger auf Fun
ktion erzeugt Zeiger von Ganzzahl ohne Typkonvertierung
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/firegl_public.c:3062: Fehler: zu wenige Argumente für Funktion
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/firegl_public.c: In function `__ke_agp_enable':
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/firegl_public.c:3096: Warnung: Verarbeiten des Argumentes 1 von Zeiger auf Fun
ktion erzeugt Zeiger von Ganzzahl ohne Typkonvertierung
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/firegl_public.c:3096: Fehler: zu wenige Argumente für Funktion
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/firegl_public.c: In function `__ke_agp_acquire':
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/firegl_public.c:3143: Fehler: zu wenige Argumente für Funktion
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/firegl_public.c:3143: Warnung: return erzeugt Ganzzahl von Zeiger ohne Typkonv
ertierung
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/firegl_public.c: In function `__ke_agp_release':
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/firegl_public.c:3154: Fehler: zu wenige Argumente für Funktion
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/firegl_public.c: In function `__ke_agp_copy_info':
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/firegl_public.c:3174: Warnung: Verarbeiten des Argumentes 1 von Zeiger auf Fun
ktion von inkompatiblem Zeigertyp
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/firegl_public.c:3174: Fehler: zu wenige Argumente für Funktion
make[1]: *** [/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/firegl_public.o] Fehler 1
make: *** [_module_/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod] Fehler 2
make: Leaving directory `/usr/src/linux-2.6.11-rc1-mm1'
* DRM module not built


Nik
nik1982 is offline   Reply With Quote
Old Jan 17, 2005, 07:56 PM   #12
black hole sun
Hey guys!
 
Join Date: Jun 2003
Location: California
Posts: 5,233
black hole sun is still being judged by the masses


Default

AFAIK the current drivers don't work with the 2.6.11-rc1 release. They need a patch, someone posted it somewhere, I'll find it.
__________________
The inhabitants of the earth are of two sorts:
Those with brains, but no religion,
And those with religion, but no brains.

-- Abul Ala al-Ma`arri, 1057 A.D.
black hole sun is offline   Reply With Quote
Old Jan 17, 2005, 08:02 PM   #13
nik1982
Newbie
 
Join Date: Nov 2004
Posts: 20
nik1982 is still being judged by the masses


Default

I've applied the 8.8.25-kernel-2.6.11+.patch patch. but the same error messages again. nik
nik1982 is offline   Reply With Quote
Old Jan 17, 2005, 08:12 PM   #14
BFCool
Newbie
 
Join Date: Jan 2005
Posts: 7
BFCool is still being judged by the masses


Default

hi everyone - anyone else here (with FC3, kernel 2.6.10, and this patch) get a completely blank screen when "startx"-ing? It sounds like the cpu is working, but nothing ever loads up. Other than that the driver seems to be installed - in fact, the last line in the X log file (once I reboot) claims "DRI loaded successfully" but thats it. Usually it loads the keyboard, mouse, whatever. Anyone else seeing this?

Ben
BFCool is offline   Reply With Quote
Old Jan 17, 2005, 08:15 PM   #15
black hole sun
Hey guys!
 
Join Date: Jun 2003
Location: California
Posts: 5,233
black hole sun is still being judged by the masses


Default

Quote:
Originally Posted by BFCool
hi everyone - anyone else here (with FC3, kernel 2.6.10, and this patch) get a completely blank screen when "startx"-ing? It sounds like the cpu is working, but nothing ever loads up. Other than that the driver seems to be installed - in fact, the last line in the X log file (once I reboot) claims "DRI loaded successfully" but thats it. Usually it loads the keyboard, mouse, whatever. Anyone else seeing this?

Ben
Yeah actually. I messed around in my BIOS and changed by AGP Aperture to 128MB and the next boot it went away

YMMV of course, but it worked for me.
__________________
The inhabitants of the earth are of two sorts:
Those with brains, but no religion,
And those with religion, but no brains.

-- Abul Ala al-Ma`arri, 1057 A.D.
black hole sun is offline   Reply With Quote
Old Jan 17, 2005, 08:24 PM   #16
Diffie
BSD daemon
 
Join Date: Nov 2003
Location: New York City
Posts: 292
Diffie is still being judged by the masses


Default

this patch for vanilla 2.6.10 works for me

Code:
  diffstat:
  
  agpgart_be.c	|   65 +++++++++++++++++++++++++++++++++++++++++++++++++-------
  firegl_public.c |	1
  2 files changed, 59 insertions(+), 7 deletions(-)
  
  diff -Nur fglrx-orig/build_mod/agpgart_be.c fglrx-o/build_mod/agpgart_be.c
  --- fglrx-orig/build_mod/agpgart_be.c	2005-01-17 19:28:36.000000000 -0500
  +++ fglrx-o/build_mod/agpgart_be.c	2005-01-17 19:33:45.000000000 -0500
  @@ -116,7 +116,14 @@
   #include <linux/pagemap.h>
   #include <linux/miscdevice.h>
   #include <linux/pm.h>
  +#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,9)
  +#define pci_find_class pci_get_class
   
  +
  +
  +
  +
  +#endif
   #if (LINUX_VERSION_CODE >= 0x020400)
   #define FGL_PM_PRESENT
   #else
  @@ -255,6 +262,12 @@
   }
   #endif
   
  +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10) 
  +#define firegl_pci_find_class(class,from) pci_get_class(class,from)
  +#else
  +#define firegl_pci_find_class(class,from) pci_find_class(class,from)
  +#endif
  +
   int agp_backend_acquire(void)
   {
  	 if (agp_bridge.type == NOT_SUPPORTED) {
  @@ -718,7 +731,7 @@
  	  *		AGP devices and collect their data.
  	  */
   
  -	while ((device = pci_find_class(PCI_CLASS_DISPLAY_VGA << 8,
  +	while ((device = firegl_pci_find_class(PCI_CLASS_DISPLAY_VGA << 8,
 					 device)) != NULL) {
  		 pci_read_config_dword(device, 0x04, &scratch);
   
  @@ -794,6 +807,13 @@
  				 command &= ~0x00000001;
  		 }
  	 }
  +
  +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10) 
 +			// the reference count has been increased in agp_backend_initialize.
  +		if (device)
  +			pci_dev_put(device); 
  +#endif
  +
  	 /*
  	  * PASS2: Figure out the 4X/2X/1X setting and enable the
  	  *		target (our motherboard chipset).
  @@ -839,8 +859,9 @@
  	  *		command registers.
  	  */
   
  -	while ((device = pci_find_class(PCI_CLASS_DISPLAY_VGA << 8,
  +	while ((device = firegl_pci_find_class(PCI_CLASS_DISPLAY_VGA << 8,
 					 device)) != NULL) {
  +
  		 pci_read_config_dword(device, 0x04, &scratch);
   
  		 if (!(scratch & 0x00100000))
  @@ -871,6 +892,12 @@
  		 }
  	 }
   
  +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10) 
 +			// the reference count has been increased in agp_backend_initialize.
  +		if (device)
  +			pci_dev_put(device); 
  +#endif
  +
  	 return 0; /* success */
   }
   
  @@ -5119,8 +5146,9 @@
  	  *		AGP devices and collect their data.
  	  */
   
  -	while ((device = pci_find_class(PCI_CLASS_DISPLAY_VGA << 8,
  +	while ((device = firegl_pci_find_class(PCI_CLASS_DISPLAY_VGA << 8,
 					 device)) != NULL) {
  +
  		 pci_read_config_dword(device, 0x04, &scratch);
   
  		 if (!(scratch & 0x00100000))
  @@ -5187,6 +5215,13 @@
  				 command &= ~0x00000001;
  		 }
  	 }
  +
  +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10) 
 +			// the reference count has been increased in agp_backend_initialize.
  +		if (device)
  +			pci_dev_put(device); 
  +#endif
  +
  	 /*
  	  * PASS2: Figure out the 4X/2X/1X setting and enable the
  	  *		target (our motherboard chipset).
  @@ -5217,8 +5252,9 @@
  	  *		command registers.
  	  */
   
  -	while ((device = pci_find_class(PCI_CLASS_DISPLAY_VGA << 8,
  +	while ((device = firegl_pci_find_class(PCI_CLASS_DISPLAY_VGA << 8,
 					 device)) != NULL) {
  +
  		 pci_read_config_dword(device, 0x04, &scratch);
   
  		 if (!(scratch & 0x00100000))
  @@ -5249,6 +5285,12 @@
  		 }
  	 }
   
  +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10) 
 +			// the reference count has been increased in agp_backend_initialize.
  +		if (device)
  +			pci_dev_put(device); 
  +#endif
  +
  	 return(0); /* success */
   }
   
  @@ -6494,10 +6536,10 @@
  	 // locate host bridge device
   #ifdef __x86_64__
  	 do {
  -		dev = pci_find_class(PCI_CLASS_BRIDGE_HOST << 8, dev);
  +		dev = firegl_pci_get_class(PCI_CLASS_BRIDGE_HOST << 8, dev);
  	 } while((dev) && !agp_check_supported_device(dev));
   #else
  -	if ((dev = pci_find_class(PCI_CLASS_BRIDGE_HOST << 8, NULL)) == NULL)
  +	if ((dev = firegl_pci_find_class(PCI_CLASS_BRIDGE_HOST << 8, NULL)) == NULL)
  		 return -ENODEV;
   #endif
   
  @@ -7040,8 +7082,12 @@
 					 &agp_bridge.mode);
  				 return hp_zx1_setup(dev);
  			 }
 -			dev = pci_find_class(PCI_CLASS_BRIDGE_HOST << 8, dev);
 +			dev = firegl_pci_get_class(PCI_CLASS_BRIDGE_HOST << 8, dev);
  		 } while (dev);
  +
  +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10) 
  +				if(dev) pci_dev_put(dev);
  +#endif
  		 return -ENODEV;
  	 }
   #endif	/* __ia64__ */
  @@ -7462,6 +7508,11 @@
  	 agp_bridge.free_gatt_table();
  	 vfree(agp_bridge.key_list);
   
  +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10)
  +		// decrease the reference count.
  +		pci_dev_put(agp_bridge.dev);
  +#endif
  +
  	 if (agp_bridge.needs_scratch_page == TRUE) {
  		 agp_bridge.scratch_page &= ~(0x00000fff);
  		 agp_bridge.agp_destroy_page((unsigned long)
  diff -Nur fglrx-orig/build_mod/firegl_public.c fglrx-o/build_mod/firegl_public.c
  --- fglrx-orig/build_mod/firegl_public.c	2005-01-17 19:28:36.000000000 -0500
  +++ fglrx-o/build_mod/firegl_public.c	2005-01-17 19:29:08.000000000 -0500
  @@ -88,6 +88,7 @@
   #include <linux/smp_lock.h>
   // newer SuSE kernels need this
   #include <linux/highmem.h>
  +#include <linux/pagemap.h> // for lock_page and unlock_page
   
   #if defined(__ia64__)
   #include <linux/vmalloc.h>
__________________
FreeBSD
the Power to Serve!

Diffie is offline   Reply With Quote
Old Jan 17, 2005, 08:27 PM   #17
Diffie
BSD daemon
 
Join Date: Nov 2003
Location: New York City
Posts: 292
Diffie is still being judged by the masses


Default

patch for 2.6.11-rc1-mm1 (module loads but did not work for me)

Code:
   diffstat:
   
   agpgart_be.c	|   65 +++++++++++++++++++++++++++++++++++++++++++++++++-------
   firegl_public.c |   51 ++++++++++++++++++++++---------------------
   2 files changed, 84 insertions(+), 32 deletions(-)
   
   diff -Nur fglrx-o/build_mod/agpgart_be.c fglrx/build_mod/agpgart_be.c
   --- fglrx-o/build_mod/agpgart_be.c	2004-12-14 12:55:47.000000000 -0500
   +++ fglrx/build_mod/agpgart_be.c	2005-01-17 17:26:57.000000000 -0500
   @@ -116,7 +116,14 @@
    #include <linux/pagemap.h>
    #include <linux/miscdevice.h>
    #include <linux/pm.h>
   +#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,9)
   +#define pci_find_class pci_get_class
    
   +
   +
   +
   +
   +#endif
    #if (LINUX_VERSION_CODE >= 0x020400)
    #define FGL_PM_PRESENT
    #else
   @@ -255,6 +262,12 @@
    }
    #endif
    
   +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10) 
   +#define firegl_pci_find_class(class,from) pci_get_class(class,from)
   +#else
   +#define firegl_pci_find_class(class,from) pci_find_class(class,from)
   +#endif
   +
    int agp_backend_acquire(void)
    {
   	 if (agp_bridge.type == NOT_SUPPORTED) {
   @@ -718,7 +731,7 @@
   	  *		AGP devices and collect their data.
   	  */
    
   -	while ((device = pci_find_class(PCI_CLASS_DISPLAY_VGA << 8,
   +	while ((device = firegl_pci_find_class(PCI_CLASS_DISPLAY_VGA << 8,
 					 device)) != NULL) {
   		 pci_read_config_dword(device, 0x04, &scratch);
    
   @@ -794,6 +807,13 @@
   				 command &= ~0x00000001;
   		 }
   	 }
   +
   +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10) 
 +			// the reference count has been increased in agp_backend_initialize.
   +		if (device)
   +			pci_dev_put(device); 
   +#endif
   +
   	 /*
   	  * PASS2: Figure out the 4X/2X/1X setting and enable the
   	  *		target (our motherboard chipset).
   @@ -839,8 +859,9 @@
   	  *		command registers.
   	  */
    
   -	while ((device = pci_find_class(PCI_CLASS_DISPLAY_VGA << 8,
   +	while ((device = firegl_pci_find_class(PCI_CLASS_DISPLAY_VGA << 8,
 					 device)) != NULL) {
   +
   		 pci_read_config_dword(device, 0x04, &scratch);
    
   		 if (!(scratch & 0x00100000))
   @@ -871,6 +892,12 @@
   		 }
   	 }
    
   +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10) 
 +			// the reference count has been increased in agp_backend_initialize.
   +		if (device)
   +			pci_dev_put(device); 
   +#endif
   +
   	 return 0; /* success */
    }
    
   @@ -5119,8 +5146,9 @@
   	  *		AGP devices and collect their data.
   	  */
    
   -	while ((device = pci_find_class(PCI_CLASS_DISPLAY_VGA << 8,
   +	while ((device = firegl_pci_find_class(PCI_CLASS_DISPLAY_VGA << 8,
 					 device)) != NULL) {
   +
   		 pci_read_config_dword(device, 0x04, &scratch);
    
   		 if (!(scratch & 0x00100000))
   @@ -5187,6 +5215,13 @@
   				 command &= ~0x00000001;
   		 }
   	 }
   +
   +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10) 
 +			// the reference count has been increased in agp_backend_initialize.
   +		if (device)
   +			pci_dev_put(device); 
   +#endif
   +
   	 /*
   	  * PASS2: Figure out the 4X/2X/1X setting and enable the
   	  *		target (our motherboard chipset).
   @@ -5217,8 +5252,9 @@
   	  *		command registers.
   	  */
    
   -	while ((device = pci_find_class(PCI_CLASS_DISPLAY_VGA << 8,
   +	while ((device = firegl_pci_find_class(PCI_CLASS_DISPLAY_VGA << 8,
 					 device)) != NULL) {
   +
   		 pci_read_config_dword(device, 0x04, &scratch);
    
   		 if (!(scratch & 0x00100000))
   @@ -5249,6 +5285,12 @@
   		 }
   	 }
    
   +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10) 
 +			// the reference count has been increased in agp_backend_initialize.
   +		if (device)
   +			pci_dev_put(device); 
   +#endif
   +
   	 return(0); /* success */
    }
    
   @@ -6494,10 +6536,10 @@
   	 // locate host bridge device
    #ifdef __x86_64__
   	 do {
   -		dev = pci_find_class(PCI_CLASS_BRIDGE_HOST << 8, dev);
   +		dev = firegl_pci_find_class(PCI_CLASS_BRIDGE_HOST << 8, dev);
   	 } while((dev) && !agp_check_supported_device(dev));
    #else
   -	if ((dev = pci_find_class(PCI_CLASS_BRIDGE_HOST << 8, NULL)) == NULL)
   +	if ((dev = firegl_pci_find_class(PCI_CLASS_BRIDGE_HOST << 8, NULL)) == NULL)
   		 return -ENODEV;
    #endif
    
   @@ -7040,8 +7082,12 @@
 					 &agp_bridge.mode);
   				 return hp_zx1_setup(dev);
   			 }
 -			dev = pci_find_class(PCI_CLASS_BRIDGE_HOST << 8, dev);
 +			dev = firegl_pci_find_class(PCI_CLASS_BRIDGE_HOST << 8, dev);
   		 } while (dev);
   +
   +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10) 
   +				if(dev) pci_dev_put(dev);
   +#endif
   		 return -ENODEV;
   	 }
    #endif	/* __ia64__ */
   @@ -7462,6 +7508,11 @@
   	 agp_bridge.free_gatt_table();
   	 vfree(agp_bridge.key_list);
    
   +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10)
   +		// decrease the reference count.
   +		pci_dev_put(agp_bridge.dev);
   +#endif
   +
   	 if (agp_bridge.needs_scratch_page == TRUE) {
   		 agp_bridge.scratch_page &= ~(0x00000fff);
   		 agp_bridge.agp_destroy_page((unsigned long)
   diff -Nur fglrx-o/build_mod/firegl_public.c fglrx/build_mod/firegl_public.c
   --- fglrx-o/build_mod/firegl_public.c	2005-01-04 20:05:05.000000000 -0500
   +++ fglrx/build_mod/firegl_public.c	2005-01-17 17:30:44.000000000 -0500
   @@ -88,6 +88,7 @@
    #include <linux/smp_lock.h>
    // newer SuSE kernels need this
    #include <linux/highmem.h>
   +#include <linux/pagemap.h> // for lock_page and unlock_page
    
    #if defined(__ia64__)
    #include <linux/vmalloc.h>
   @@ -2590,13 +2591,13 @@
    #endif /* __ia64__ */
 				 vma->vm_flags |= VM_IO; /* not in core dump */
   			 }
   -			if (remap_page_range(FGL_VMA_API_PASS
   +			if (remap_pfn_range(FGL_VMA_API_PASS
 								 vma->vm_start,
 -								 __ke_vm_offset(vma),
 +								 vma->vm_pgoff,
 								 vma->vm_end - vma->vm_start,
 								 vma->vm_page_prot))
   			 {
   -			    __KE_DEBUG("remap_page_range failed\n");
   +			    __KE_DEBUG("remap_pfn_range failed\n");
   				 return -EAGAIN;
   			 }
 			 vma->vm_flags |= VM_SHM | VM_RESERVED; /* Don't swap */
   @@ -2657,7 +2658,7 @@
   			 {
 			 	if (__ke_vm_offset(vma) >= __pa(high_memory))
 			 		vma->vm_flags |= VM_IO; /* not in core dump */
 -				if (remap_page_range(FGL_VMA_API_PASS
 +				if (remap_pfn_range(FGL_VMA_API_PASS
 			 		 		 vma->vm_start,
 			 		 		 __ke_vm_offset(vma),
 			 		 		 vma->vm_end - vma->vm_start,
   @@ -2694,7 +2695,7 @@
   			 {
 			 	if (__ke_vm_offset(vma) >= __pa(high_memory))
 			 		vma->vm_flags |= VM_IO; /* not in core dump */
 -				if (remap_page_range(FGL_VMA_API_PASS
 +				if (remap_pfn_range(FGL_VMA_API_PASS
 			 		 		 vma->vm_start,
 			 		 		 __ke_vm_offset(vma),
 			 		 		 vma->vm_end - vma->vm_start,
   @@ -3057,10 +3058,10 @@
    
    struct _agp_memory* ATI_API_CALL __ke_agp_allocate_memory(__ke_size_t pages, unsigned long type)
    {
   -#ifdef __AGP__
   -	if (AGP_AVAILABLE(allocate_memory))
   -		return AGP_FUNC(allocate_memory)(pages, type);
   -#endif /* __AGP__ */
   +//#ifdef __AGP__
   +//	if (AGP_AVAILABLE(allocate_memory))
   +//		return AGP_FUNC(allocate_memory)(pages, type);
   +//#endif /* __AGP__ */
   	 if (firegl_agp)
   		 return (struct _agp_memory*)FIREGL_agp_allocate_memory(pages, type);
   	 return NULL;
   @@ -3090,13 +3091,13 @@
    
    int ATI_API_CALL __ke_agp_enable(unsigned long mode)
    {
   -#ifdef __AGP__
   -	if (AGP_AVAILABLE(enable))
   -	{
   -		AGP_FUNC(enable)(mode);
   -		return 0;
   -	}
   -#endif /* __AGP__ */
   +//#ifdef __AGP__
   +//	if (AGP_AVAILABLE(enable))
   +//	{
   +//		AGP_FUNC(enable)(mode);
   +//		return 0;
   +//	}
   +//#endif /* __AGP__ */
   	 if (firegl_agp)
   	 {
   		 FIREGL_agp_enable(mode);
   @@ -3138,10 +3139,10 @@
    
    int ATI_API_CALL __ke_agp_acquire(void)
    {
   -#ifdef __AGP__
   -	if (AGP_AVAILABLE(acquire))
   -		return AGP_FUNC(acquire)();
   -#endif /* __AGP__ */
   +//#ifdef __AGP__
   +//	if (AGP_AVAILABLE(acquire))
   +//		return AGP_FUNC(acquire)();
   +//#endif /* __AGP__ */
   	 if (firegl_agp)
   		 return FIREGL_agp_backend_acquire();
   	 return -EINVAL;
   @@ -3149,10 +3150,10 @@
    
    void ATI_API_CALL __ke_agp_release(void)
    {
   -#ifdef __AGP__
   -	if (AGP_AVAILABLE(release))
   -		AGP_FUNC(release)();
   -#endif /* __AGP__ */
   +//#ifdef __AGP__
   +//	if (AGP_AVAILABLE(release))
   +//		AGP_FUNC(release)();
   +//#endif /* __AGP__ */
   	 if (firegl_agp)
   		 FIREGL_agp_backend_release();
    }
   @@ -3171,7 +3172,7 @@
    #endif
   		 agp_kern_info kern;	
    
   -		AGP_FUNC(copy_info)(&kern);
   +//		AGP_FUNC(copy_info)(&kern);
   		 device = kern.device;
    
   		 info->version.major = kern.version.major;
__________________
FreeBSD
the Power to Serve!

Diffie is offline   Reply With Quote
Old Jan 17, 2005, 11:17 PM   #18
Bezzer
Newbie
 
Join Date: Jan 2005
Posts: 8
Bezzer is still being judged by the masses


Default

Hey,

I'm sorry if this sounds stupid, but would somebody be able to tell me how to apply this patch?
Bezzer is offline   Reply With Quote
Old Jan 17, 2005, 11:20 PM   #19
Diffie
BSD daemon
 
Join Date: Nov 2003
Location: New York City
Posts: 292
Diffie is still being judged by the masses


Default

Try

Code:
  patch -p0 < patch_file
  or
  patch -p1 < patch_file
Hope this helps
__________________
FreeBSD
the Power to Serve!

Diffie is offline   Reply With Quote
Old Jan 18, 2005, 12:23 AM   #20
Triggerdeft
Newbie
 
Join Date: Jan 2005
Posts: 15
Triggerdeft is still being judged by the masses


Default

I'm also a newb.... -what- does you code-snippet mean? I need some hand-holding here. If I go into the console and type "patch -p0 < patch_file" I'm pretty sure it's not going to do anything, let alone what we're trying to accomplish. What patch-file? Where is the patch-file? Who do I have to bribe to get the patch-file? What do I do when I get the patch_file. Exactly. It's like this: I'm a Linux idiot at this point, but I'm not a computer idiot... I just need some step-by-step instruction. Thanks.
Triggerdeft is offline   Reply With Quote
Old Jan 18, 2005, 12:24 AM   #21
black hole sun
Hey guys!
 
Join Date: Jun 2003
Location: California
Posts: 5,233
black hole sun is still being judged by the masses


Default

Trigger see your thread.
__________________
The inhabitants of the earth are of two sorts:
Those with brains, but no religion,
And those with religion, but no brains.

-- Abul Ala al-Ma`arri, 1057 A.D.
black hole sun is offline   Reply With Quote
Old Jan 18, 2005, 12:30 AM   #22
Triggerdeft
Newbie
 
Join Date: Jan 2005
Posts: 15
Triggerdeft is still being judged by the masses


Default

Gotcha, thanks.
Triggerdeft is offline   Reply With Quote
Old Jan 18, 2005, 12:34 AM   #23
Triggerdeft
Newbie
 
Join Date: Jan 2005
Posts: 15
Triggerdeft is still being judged by the masses


Default

Have an issue.. please see my thread.
Triggerdeft is offline   Reply With Quote
Old Jan 18, 2005, 03:18 AM   #24
TheOneKEA
1938 Tube Stock
 
Join Date: Oct 2003
Location: Somewhere in London, riding the Underground
Posts: 640
TheOneKEA is still being judged by the masses


Default

Quote:
Originally Posted by Diffie
this patch for vanilla 2.6.10 works for me

Code:
  diffstat:
  
  agpgart_be.c	|   65 +++++++++++++++++++++++++++++++++++++++++++++++++-------
  firegl_public.c |	1
  2 files changed, 59 insertions(+), 7 deletions(-)
  
  diff -Nur fglrx-orig/build_mod/agpgart_be.c fglrx-o/build_mod/agpgart_be.c
  --- fglrx-orig/build_mod/agpgart_be.c	2005-01-17 19:28:36.000000000 -0500
  +++ fglrx-o/build_mod/agpgart_be.c	2005-01-17 19:33:45.000000000 -0500
  @@ -116,7 +116,14 @@
   #include <linux/pagemap.h>
   #include <linux/miscdevice.h>
   #include <linux/pm.h>
  +#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,9)
  +#define pci_find_class pci_get_class
   
  +
  +
  +
  +
  +#endif
   #if (LINUX_VERSION_CODE >= 0x020400)
   #define FGL_PM_PRESENT
   #else
  @@ -255,6 +262,12 @@
   }
   #endif
   
  +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10) 
  +#define firegl_pci_find_class(class,from) pci_get_class(class,from)
  +#else
  +#define firegl_pci_find_class(class,from) pci_find_class(class,from)
  +#endif
  +
   int agp_backend_acquire(void)
   {
  	 if (agp_bridge.type == NOT_SUPPORTED) {
  @@ -718,7 +731,7 @@
  	  *		AGP devices and collect their data.
  	  */
   
  -	while ((device = pci_find_class(PCI_CLASS_DISPLAY_VGA << 8,
  +	while ((device = firegl_pci_find_class(PCI_CLASS_DISPLAY_VGA << 8,
 					 device)) != NULL) {
  		 pci_read_config_dword(device, 0x04, &scratch);
   
  @@ -794,6 +807,13 @@
  				 command &= ~0x00000001;
  		 }
  	 }
  +
  +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10) 
 +			// the reference count has been increased in agp_backend_initialize.
  +		if (device)
  +			pci_dev_put(device); 
  +#endif
  +
  	 /*
  	  * PASS2: Figure out the 4X/2X/1X setting and enable the
  	  *		target (our motherboard chipset).
  @@ -839,8 +859,9 @@
  	  *		command registers.
  	  */
   
  -	while ((device = pci_find_class(PCI_CLASS_DISPLAY_VGA << 8,
  +	while ((device = firegl_pci_find_class(PCI_CLASS_DISPLAY_VGA << 8,
 					 device)) != NULL) {
  +
  		 pci_read_config_dword(device, 0x04, &scratch);
   
  		 if (!(scratch & 0x00100000))
  @@ -871,6 +892,12 @@
  		 }
  	 }
   
  +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10) 
 +			// the reference count has been increased in agp_backend_initialize.
  +		if (device)
  +			pci_dev_put(device); 
  +#endif
  +
  	 return 0; /* success */
   }
   
  @@ -5119,8 +5146,9 @@
  	  *		AGP devices and collect their data.
  	  */
   
  -	while ((device = pci_find_class(PCI_CLASS_DISPLAY_VGA << 8,
  +	while ((device = firegl_pci_find_class(PCI_CLASS_DISPLAY_VGA << 8,
 					 device)) != NULL) {
  +
  		 pci_read_config_dword(device, 0x04, &scratch);
   
  		 if (!(scratch & 0x00100000))
  @@ -5187,6 +5215,13 @@
  				 command &= ~0x00000001;
  		 }
  	 }
  +
  +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10) 
 +			// the reference count has been increased in agp_backend_initialize.
  +		if (device)
  +			pci_dev_put(device); 
  +#endif
  +
  	 /*
  	  * PASS2: Figure out the 4X/2X/1X setting and enable the
  	  *		target (our motherboard chipset).
  @@ -5217,8 +5252,9 @@
  	  *		command registers.
  	  */
   
  -	while ((device = pci_find_class(PCI_CLASS_DISPLAY_VGA << 8,
  +	while ((device = firegl_pci_find_class(PCI_CLASS_DISPLAY_VGA << 8,
 					 device)) != NULL) {
  +
  		 pci_read_config_dword(device, 0x04, &scratch);
   
  		 if (!(scratch & 0x00100000))
  @@ -5249,6 +5285,12 @@
  		 }
  	 }
   
  +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10) 
 +			// the reference count has been increased in agp_backend_initialize.
  +		if (device)
  +			pci_dev_put(device); 
  +#endif
  +
  	 return(0); /* success */
   }
   
  @@ -6494,10 +6536,10 @@
  	 // locate host bridge device
   #ifdef __x86_64__
  	 do {
  -		dev = pci_find_class(PCI_CLASS_BRIDGE_HOST << 8, dev);
  +		dev = firegl_pci_get_class(PCI_CLASS_BRIDGE_HOST << 8, dev);
  	 } while((dev) && !agp_check_supported_device(dev));
   #else
  -	if ((dev = pci_find_class(PCI_CLASS_BRIDGE_HOST << 8, NULL)) == NULL)
  +	if ((dev = firegl_pci_find_class(PCI_CLASS_BRIDGE_HOST << 8, NULL)) == NULL)
  		 return -ENODEV;
   #endif
   
  @@ -7040,8 +7082,12 @@
 					 &agp_bridge.mode);
  				 return hp_zx1_setup(dev);
  			 }
 -			dev = pci_find_class(PCI_CLASS_BRIDGE_HOST << 8, dev);
 +			dev = firegl_pci_get_class(PCI_CLASS_BRIDGE_HOST << 8, dev);
  		 } while (dev);
  +
  +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10) 
  +				if(dev) pci_dev_put(dev);
  +#endif
  		 return -ENODEV;
  	 }
   #endif	/* __ia64__ */
  @@ -7462,6 +7508,11 @@
  	 agp_bridge.free_gatt_table();
  	 vfree(agp_bridge.key_list);
   
  +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10)
  +		// decrease the reference count.
  +		pci_dev_put(agp_bridge.dev);
  +#endif
  +
  	 if (agp_bridge.needs_scratch_page == TRUE) {
  		 agp_bridge.scratch_page &= ~(0x00000fff);
  		 agp_bridge.agp_destroy_page((unsigned long)
  diff -Nur fglrx-orig/build_mod/firegl_public.c fglrx-o/build_mod/firegl_public.c
  --- fglrx-orig/build_mod/firegl_public.c	2005-01-17 19:28:36.000000000 -0500
  +++ fglrx-o/build_mod/firegl_public.c	2005-01-17 19:29:08.000000000 -0500
  @@ -88,6 +88,7 @@
   #include <linux/smp_lock.h>
   // newer SuSE kernels need this
   #include <linux/highmem.h>
  +#include <linux/pagemap.h> // for lock_page and unlock_page
   
   #if defined(__ia64__)
   #include <linux/vmalloc.h>

I wonder if I should switch to this patch, to see if it solves my triple Oops on shutdown.
__________________
Proud user of teh Second Fox of Fire
Registered Linux User #289618
TheOneKEA is offline   Reply With Quote
Old Jan 18, 2005, 03:26 AM   #25
Diffie
BSD daemon
 
Join Date: Nov 2003
Location: New York City
Posts: 292
Diffie is still being judged by the masses


Default

Hey i was a n00b at one time too

Basically you copy all the text in the code window from the post to a text editor and save it as patch_file (patch_file name was a exapmle, you can name it patch_for_b0rken_ati_driver.diff for all i care) then you use patch -p0 < patch_file to apply the diff with the changes. Try man patch or google.com for patch or diff

Hope this helps
__________________
FreeBSD
the Power to Serve!

Diffie is offline   Reply With Quote
Old Jan 18, 2005, 05:19 PM   #26
sk3ptic
Newbie
 
Join Date: Jan 2005
Posts: 1
sk3ptic is still being judged by the masses


Default

Quote:
Originally Posted by BFCool
hi everyone - anyone else here (with FC3, kernel 2.6.10, and this patch) get a completely blank screen when "startx"-ing? It sounds like the cpu is working, but nothing ever loads up. Other than that the driver seems to be installed - in fact, the last line in the X log file (once I reboot) claims "DRI loaded successfully" but thats it. Usually it loads the keyboard, mouse, whatever. Anyone else seeing this?

Ben
I am running FC3, kernel 2.6.10. I loaded the drivers last night without the patch and got exactly the same behavior. As soon as X starts the screen goes black. I was geeked about trying the patch when I get home tonight, but it doesn't sound like it will help. I thought the sync rate was getting messed up, but hte log files look fine.

My card is PCI (9200SE) not AGP, so I don't know if there is anything like the memory aperature setting in the BIOS.

Anyone get this working with FC3?
Larry
sk3ptic is offline   Reply With Quote
Old Jan 18, 2005, 05:21 PM   #27
bilko5000
Radeon R100
 
Join Date: Jul 2003
Posts: 46
bilko5000 is still being judged by the masses


Default working 2.6.11-rc1 patch

i've got a working patch for using 2.6.11-rc1 kernels, you need to apply the 2.6.10 patch that mtippet posted first, and then this on top.

it just uses remap_pfn_range instead of remap_page_range which is unavailable in 2.6.11.

Code:
--- firegl_public.orig	2005-01-18 22:13:16.000000000 +0000
+++ firegl_public.c	2005-01-18 22:06:54.000000000 +0000
@@ -2591,13 +2591,13 @@
 #endif /* __ia64__ */
                 vma->vm_flags |= VM_IO; /* not in core dump */
             }
-            if (remap_page_range(FGL_VMA_API_PASS
+            if (remap_pfn_range(FGL_VMA_API_PASS
                                  vma->vm_start,
-                                 __ke_vm_offset(vma),
+                                 __ke_vm_offset(vma) >> PAGE_SHIFT,
                                  vma->vm_end - vma->vm_start,
                                  vma->vm_page_prot))
             {
-                __KE_DEBUG("remap_page_range failed\n");
+                __KE_DEBUG("remap_pfn_range failed\n");
                 return -EAGAIN;
             }
             vma->vm_flags |= VM_SHM | VM_RESERVED; /* Don't swap */
@@ -2658,13 +2658,13 @@
 			{
 				if (__ke_vm_offset(vma) >= __pa(high_memory))
 					vma->vm_flags |= VM_IO; /* not in core dump */
-				if (remap_page_range(FGL_VMA_API_PASS
+				if (remap_pfn_range(FGL_VMA_API_PASS
 									 vma->vm_start,
-									 __ke_vm_offset(vma),
+									 __ke_vm_offset(vma) >> PAGE_SHIFT,
 									 vma->vm_end - vma->vm_start,
 									 vma->vm_page_prot))
 				{
-					__KE_DEBUG("remap_page_range failed\n");
+					__KE_DEBUG("remap_pfn_range failed\n");
 					return -EAGAIN;
 				}
 #ifdef __x86_64__
@@ -2695,13 +2695,13 @@
 			{
 				if (__ke_vm_offset(vma) >= __pa(high_memory))
 					vma->vm_flags |= VM_IO; /* not in core dump */
-				if (remap_page_range(FGL_VMA_API_PASS
+				if (remap_pfn_range(FGL_VMA_API_PASS
 									 vma->vm_start,
-									 __ke_vm_offset(vma),
+									 __ke_vm_offset(vma) >> PAGE_SHIFT,
 									 vma->vm_end - vma->vm_start,
 									 vma->vm_page_prot))
 				{
-					__KE_DEBUG("remap_page_range failed\n");
+					__KE_DEBUG("remap_pfn_range failed\n");
 					return -EAGAIN;
 				}
 #ifdef __x86_64__
bilko5000 is offline   Reply With Quote
Old Jan 18, 2005, 08:29 PM   #28
BFCool
Newbie
 
Join Date: Jan 2005
Posts: 7
BFCool is still being judged by the masses


Default

Quote:
Originally Posted by sk3ptic
I am running FC3, kernel 2.6.10. I loaded the drivers last night without the patch and got exactly the same behavior. As soon as X starts the screen goes black. I was geeked about trying the patch when I get home tonight, but it doesn't sound like it will help. I thought the sync rate was getting messed up, but hte log files look fine.

My card is PCI (9200SE) not AGP, so I don't know if there is anything like the memory aperature setting in the BIOS.

Anyone get this working with FC3?
Larry
Hmm my card is a PCI version as well, so that could be the problem. Also maybe its due to running X.org 6.8.1 instead of 6.8.0? Still no luck over here, having tried both "UseInternalAGP" = no and yes (not at the same time of course). Diffie's patch wouldn't even run for me - don't know what that's about either. Thanks guys!
BFCool is offline   Reply With Quote
Old Jan 20, 2005, 08:33 AM   #29
B3lg4ri0n
Newbie
 
Join Date: Jan 2005
Posts: 1
B3lg4ri0n is still being judged by the masses


Question

i've copied tho code into a file, but get this message when i try to apply the patch
-------------------------------------------------------------------------------------------------------------------------------------------------------------------
[[email protected] build_mod]# patch -p0 -i /home/belgarion/Downloads/rpms/8.8.25-kernel-2.6.10+.patch
patching file agpgart_be.c
patch: **** malformed patch at line 6: }
-------------------------------------------------------------------------------------------------------------------------------------------------------------------

anyone an idea what went wrong?
B3lg4ri0n is offline   Reply With Quote
Old Jan 20, 2005, 07:37 PM   #30
EvilDarkArchon
Newbie
 
Join Date: Jan 2004
Posts: 4
EvilDarkArchon is still being judged by the masses


Default

Code:
make: Entering directory `/usr/src/linux-2.6.11-rc1-xx2'
  CC [M]  /var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/agp3.o
  CC [M]  /var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/nvidia-agp.o
  CC [M]  /var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/agpgart_be.o
  CC [M]  /var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/i7505-agp.o
  CC [M]  /var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/firegl_public.o
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/firegl_public.c: In function `firegl_stub_putminor':
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/firegl_public.c:510: warning: `inter_module_put' is deprecated (declared at include/linux/module.h:578)
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/firegl_public.c:512: warning: `inter_module_unregister' is deprecated (declared at include/linux/module.h:574)
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/firegl_public.c: In function `firegl_stub_register':
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/firegl_public.c:532: warning: `inter_module_register' is deprecated (declared at include/linux/module.h:573)
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/firegl_public.c:563: warning: `inter_module_put' is deprecated (declared at include/linux/module.h:578)
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/firegl_public.c: In function `firegl_get_user_ptr':
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/firegl_public.c:1072: warning: assignment makes pointer from integer without a cast
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/firegl_public.c: In function `firegl_put_user_ptr':
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/firegl_public.c:1104: warning: cast from pointer to integer of different size
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/firegl_public.c:1104: warning: cast from pointer to integer of different size
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/firegl_public.c:1104: warning: cast from pointer to integer of different size
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/firegl_public.c:1104: warning: cast from pointer to integer of different size
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/firegl_public.c: In function `__ke_get_vm_phys_addr':
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/firegl_public.c:1667: error: structure has no member named `pud'
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/firegl_public.c: In function `do_vm_shm_nopage':
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/firegl_public.c:2187: error: structure has no member named `pud'
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/firegl_public.c: In function `__ke_vm_phys_addr_str':
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/firegl_public.c:2557: error: structure has no member named `pud'
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/firegl_public.c: At top level:
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/firegl_public.c:2645: warning: initialization from incompatible pointer type
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/firegl_public.c: In function `__ke_agp_uninit':
/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/firegl_public.c:3131: warning: `inter_module_put' is deprecated (declared at include/linux/module.h:578)
make[1]: *** [/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod/firegl_public.o] Error 1
make: *** [_module_/var/tmp/portage/ati-drivers-8.8.25/work/lib/modules/fglrx/build_mod] Error 2
this seems to happen with any 2.6.11-rc1-mm1 based kernel and that's with the patch from http://www.gehirn.org.uk/wiki/images...-2.6.11+.patch, it only happens on x86_64, it seems to compile fine on x86.

Last edited by EvilDarkArchon : Jan 20, 2005 at 07:43 PM.
EvilDarkArchon is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Is the Oblivian drivers patch available with the 6.9s? jkilla74 AMD Radeon Software Discussion and Support 1 Sep 23, 2006 11:23 AM
Patch for drivers against 2.6.11-rc4 Kepi Drivers 1 Feb 19, 2005 05:31 PM
Ati drivers and Patch available for SuSe 9.1 ZenPirate Drivers 0 May 13, 2004 12:15 PM
Trying to download d3d patch/drivers need help! OtherBeing Radeon Technical Support 3 Sep 28, 2002 10:07 PM
New Drivers Patch!!!!!!!!!!! on Ati LukaR AMD Radeon Software Discussion and Support 10 Sep 11, 2002 11:11 PM


All times are GMT -5. The time now is 03:02 AM.



Powered by vBulletin® Version 3.6.5
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
All trademarks used are properties of their respective owners. Copyright ©1998-2011 Rage3D.com
Links monetized by VigLink