View Single Post
Old Nov 9, 2008, 01:39 PM   #6
Qualitier
UltraRacer PC forever
 
Join Date: Apr 2002
Location: Spain Madrid
Posts: 1,911
Qualitier is still being judged by the masses


Default

The PSU should be enough. With a 90W TDP processor (4850: 110W), that system should consume about 270W.

EDIT:

http://www.antec.com/usa/productDeta...an=us&id=27430

Dual 12V outputs: 12V2 for Motherboard and peripherals; 12V1 for processor

Well... not so loose in the V2 rail depending on the specs, but these don't sound me to PSU problems anyway.
__________________

Windows XP 32 pro + Windows Vista 32 Ultimate, CCC + ATi Tray Tools
Club3D HD4890 Superclocked Edition (950/1050·4) with Accelero S1 rev2 + Turbo Module (2 80mm low-profile fans w/o frame)
LCD Samsung SyncMaster T260 (26", 1920x1200)
Gigabyte GA-MA790FXT-UD5P (socket AM3, chipset AMD-790FX)
Phenom II X4 955-BE @ stock
4x2GB Geil DDR3-1333 7-7-7-24-33 1.5V @ 1333MHz 7-7-7-24-33-1T 1.6V; dual channel enabled; unganged mode
Sound Blaster Live! 5.1 with gameport, AverMedia AVerTV Hybrid Super007
2x WD 640GB Caviar Blue (SATA) in RAID 0, DVD reader (IDE), 2 DVD recorders (SATA+IDE), floppy drive, card reader
Corsair VX-550W, one +12V x 41A rail, 81-85% efficiency



Windows XP 32 pro, no CCC, ATi Tray Tools
Sapphire X1950pro 512MB AGP (580/702·2 MHz) with Accelero X2
CRT Nokia 446Xpro (19", 107 kHz) @ 1600x1200x75Hz (desktop) or 1280x1024x85Hz (games)
Asrock AM2NF3-VSTA (nForce3 250); [email protected] MHz (motherboard limitation, 3216MB/s up + 3216MB/s down)
Athlon64 X2 5000+ Brisbane (@13*201=2613MHz)
2x2GB Buffalo 2.1V + 2x1GB Kingston 2.0V, both DDR2-800 [email protected] 2*373MHz (2613/7) 4-4-4-12-2T 2.0V; dual channel enabled
56k modem, drives etc
Corsair VX-450W, one +12V x 33A rail, 81-85% efficiency
190W maximum consumption from the wall (monitor apart)

Last edited by Qualitier : Nov 9, 2008 at 01:46 PM.
Qualitier is offline